Hi Rob,
On 17-01-19 09:36 AM, Rob Herring wrote:
On Tue, Jan 17, 2017 at 01:35:07PM +0530, Raviteja Garimella wrote:
This patch adds device tree bindings documentation for Synopsys
USB device controller platform driver.
Bindings describe h/w, not drivers.
Signed-off-by: Raviteja Garimella <raviteja.garimella@xxxxxxxxxxxx>
---
.../devicetree/bindings/usb/snps,dw-ahb-udc.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
diff --git a/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt b/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
new file mode 100644
index 0000000..0c18327
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
@@ -0,0 +1,27 @@
+Synopsys USB Device controller.
+
+The device node is used for Synopsys Designware Cores AHB
+Subsystem Device Controller (UDC).
+
+This device node is used by UDCs integrated it Broadcom's
+Northstar2 and Cygnus SoC's.
You need compatible strings for these in addition.
We don't need compatibility strings when an IP block is integrated into
an SoC. Otherwise each time we add the IP block to a new SoC we would
need to update ever linux driver that supports that SoC. That doesn't
make sense?
Cygnus and Northstar2 use existing drivers for such block as UARTs, SPI
controllers, NAND controllers, etc, etc. We haven't added compatibility
strings for those drivers and won't be.
Perhaps comment above can be:
This device node is used by UDCs integrated it such as Broadcom's
Northstar2 and Cygnus SoC's.
+
+Required properties:
+ - compatible: should be "snps,dw-ahb-udc"
This is a different IP than DWC2?
+ - reg: Offset and length of UDC register set
+ - interrupts: description of interrupt line
+ - phys: phandle to phy node.
+ - extcon: phandle to the extcon device. This is optional and
+ not required for those that don't require extcon support.
+ Extcon support will be required if the UDC is connected to
+ a Dual Role Device Phy that supports both Host and Device
+ mode based on the external cable.
Drop this. It should be a part of the phy. Also, I don't care to see new
users of extcon binding because it needs redoing.
We may need extcon support to support DRD Phy though. We have to work
within the framework that exists in linux today. If modified in the
future adapt to it as needed?
Regards,
Scott
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
