On 12/16/2013 06:38 PM, Santosh Shilimkar wrote:
On Thursday 12 December 2013 01:12 PM, Grygorii Strashko wrote:
The similar GPIO HW block is used by keystone SoCs as
in Davinci SoCs.
Hence, reuse Davinci GPIO driver for Keystone taking into
account that Keystone contains ARM GIC IRQ controller which
is implemented using IRQ Chip.
Documentation:
http://www.ti.com/lit/ug/sprugv1/sprugv1.pdf
CC: Linus Walleij <linus.walleij@xxxxxxxxxx>
CC: Sekhar Nori <nsekhar@xxxxxx>
CC: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
CC: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
---
.../devicetree/bindings/gpio/gpio-davinci.txt | 4 +-
drivers/gpio/gpio-davinci.c | 49 +++++++++++++++-----
2 files changed, 40 insertions(+), 13 deletions(-)
diff --git a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
index a2e839d..4ce9862 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-davinci.txt
@@ -1,7 +1,7 @@
-Davinci GPIO controller bindings
+Davinci/Keystone GPIO controller bindings
Required Properties:
-- compatible: should be "ti,dm6441-gpio"
+- compatible: should be "ti,dm6441-gpio", "ti,keystone-gpio"
- reg: Physical base address of the controller and the size of memory mapped
registers.
diff --git a/drivers/gpio/gpio-davinci.c b/drivers/gpio/gpio-davinci.c
index 73f65ca..3e44e0c 100644
--- a/drivers/gpio/gpio-davinci.c
+++ b/drivers/gpio/gpio-davinci.c
@@ -413,6 +413,27 @@ static const struct irq_domain_ops davinci_gpio_irq_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
+static struct irq_chip *davinci_gpio_get_irq_chip(unsigned int irq)
+{
+ static struct irq_chip_type gpio_unbanked;
+
+ gpio_unbanked = *container_of(irq_get_chip(irq),
+ struct irq_chip_type, chip);
+
+ return &gpio_unbanked.chip;
+};
+
+static struct irq_chip *keystone_gpio_get_irq_chip(unsigned int irq)
+{
+ static struct irq_chip gpio_unbanked;
+
+ gpio_unbanked = *irq_get_chip(irq);
+ pr_err("keystone_gpio_get_irq_chip\n");
+ return &gpio_unbanked;
+};
+
+static const struct of_device_id davinci_gpio_ids[];
+
/*
* NOTE: for suspend/resume, probably best to make a platform_device with
* suspend_late/resume_resume calls hooking into results of the set_wake()
@@ -433,6 +454,15 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
struct davinci_gpio_platform_data *pdata = dev->platform_data;
struct davinci_gpio_regs __iomem *g;
struct irq_domain *irq_domain = NULL;
+ const struct of_device_id *match;
+ struct irq_chip *irq_chip;
+ struct irq_chip *(*gpio_get_irq_chip)(unsigned int irq);
+
+ gpio_get_irq_chip = davinci_gpio_get_irq_chip;
+ match = of_match_device(of_match_ptr(davinci_gpio_ids),
+ dev);
+ if (match)
+ gpio_get_irq_chip = match->data;
and if the DT node is not populated ?
ngpio = pdata->ngpio;
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -442,7 +472,6 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
}
bank_irq = res->start;
-
stray change..
if (!bank_irq) {
dev_err(dev, "Invalid IRQ resource\n");
return -ENODEV;
@@ -484,25 +513,22 @@ static int davinci_gpio_irq_setup(struct platform_device *pdev)
}
/*
- * AINTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
+ * INTC can handle direct/unbanked IRQs for GPIOs, with the GPIO
So you want to have a generic name here. If you are changing it, change it
across the driver in a separate patch or leave it as is...
I don't think it matters much..
Uh. Ok. I'll drop renaming.
With those comments addressed, you can add my ack.
Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
