Re: [PATCH v2 4/5] fbdev/ssd1307fb: add support to enable VBAT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 19/01/17 00:33, Rob Herring wrote:
> On Fri, Jan 13, 2017 at 12:35:48PM +0200, Jyri Sarha wrote:
>> From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
>>
>> SSD1306 needs VBAT when it is wired in charge pump configuration. This
>> patch adds support to the driver to enable VBAT regulator at init time.
>>
>> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
>> Reviewed-by: Roger Quadros <rogerq@xxxxxx>
>> Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
>> ---
>>  .../devicetree/bindings/display/ssd1307fb.txt        |  1 +
>>  drivers/video/fbdev/ssd1307fb.c                      | 20 +++++++++++++++++++-
>>  2 files changed, 20 insertions(+), 1 deletion(-)
>>
>> diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt
>> index 6617df6..209d931 100644
>> --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
>> +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt
>> @@ -16,6 +16,7 @@ Required properties:
>>  Optional properties:
>>    - reset-gpios: The GPIO used to reset the OLED display, if available. See
>>                   Documentation/devicetree/bindings/gpio/gpio.txt for details.
>> +  - vbat-supply: The supply for VBAT
> 
> According to the datasheet, SSD1307 has 2 supplies: Vdd and Vcc
> 
> I don't see any mention of a charge pump, so that must be an external 
> component.

VBAT is for SSD1306. Perhaps the DT doc should mention it.

 Tomi

Attachment: signature.asc
Description: OpenPGP digital signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux