Re: [PATCH 2/6] usb: mtu3: add reference clock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 






On 18/01/17 07:08, Chunfeng Yun wrote:
usually, the reference clock comes from 26M oscillator directly,
but some SoCs are not, add it for compatibility.

Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
 drivers/usb/mtu3/mtu3.h      |    1 +
 drivers/usb/mtu3/mtu3_plat.c |   21 +++++++++++++++++++--
 2 files changed, 20 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index ba9df71..aa6fd6a 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -225,6 +225,7 @@ struct ssusb_mtk {
 	/* common power & clock */
 	struct regulator *vusb33;
 	struct clk *sys_clk;
+	struct clk *ref_clk;
 	/* otg */
 	struct otg_switch_mtk otg_switch;
 	enum usb_dr_mode dr_mode;
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 6344859..19a345d 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -123,7 +123,13 @@ static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
 	ret = clk_prepare_enable(ssusb->sys_clk);
 	if (ret) {
 		dev_err(ssusb->dev, "failed to enable sys_clk\n");
-		goto clk_err;
+		goto sys_clk_err;
+	}
+
+	ret = clk_prepare_enable(ssusb->ref_clk);
+	if (ret) {
+		dev_err(ssusb->dev, "failed to enable ref_clk\n");
+		goto ref_clk_err;
 	}

 	ret = ssusb_phy_init(ssusb);
@@ -143,8 +149,10 @@ static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
 phy_err:
 	ssusb_phy_exit(ssusb);
 phy_init_err:
+	clk_disable_unprepare(ssusb->ref_clk);
+ref_clk_err:
 	clk_disable_unprepare(ssusb->sys_clk);
-clk_err:
+sys_clk_err:
 	regulator_disable(ssusb->vusb33);
 vusb33_err:

@@ -154,6 +162,7 @@ static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
 static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
 {
 	clk_disable_unprepare(ssusb->sys_clk);
+	clk_disable_unprepare(ssusb->ref_clk);
 	regulator_disable(ssusb->vusb33);
 	ssusb_phy_power_off(ssusb);
 	ssusb_phy_exit(ssusb);
@@ -216,6 +225,12 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
 		return PTR_ERR(ssusb->sys_clk);
 	}

+	ssusb->ref_clk = devm_clk_get(dev, "ref_ck");
+	if (IS_ERR(ssusb->ref_clk)) {
+		dev_err(dev, "failed to get ref clock\n");
+		return PTR_ERR(ssusb->ref_clk);
+	}
+

That would break older dts bindings, right?
ref_ck must be optional for the code.

Regards,
Matthias
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux