Hi Neil,
ST may use this hardware IP also in other SoC, even that is not true
now, I hope that "st" is a more futur proof name.
Best regards
Yannick Fertré
On 01/16/2017 05:02 PM, Neil Armstrong wrote:
> On 01/16/2017 02:28 PM, Yannick Fertre wrote:
>> The purpose of this set of patches is to add a new driver for stm32f429.
>> This driver was developed and tested on evaluation board stm32429i.
>>
>> Stm32f4 is a MCU platform which don't have MMU so the last patches developed
>> by Benjamin Gaignard regarding "DRM: allow to use mmuless devices"
>> are necessary.
>>
>> The board stm429i embeds a Ampire AM-480272H3TMQW-T01H screen.
>> A new simple panel am-480272h3tmqw-t01h have been added to support it.
>>
>> Yannick Fertre (7):
>> dt-bindings: display: add STM32 LTDC driver
>> drm/st: Add STM32 LTDC driver
>> dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel
>> drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H
>> ARM: dts: stm32f429: Add ltdc support
>> ARM: dts: stm32429i-eval: Enable ltdc & simple panel on Eval board
>> ARM: configs: Add STM32 LTDC support in STM32 defconfig
>>
>> .../display/panel/ampire,am-480272h3tmqw-t01h.txt | 7 +
>> .../devicetree/bindings/display/st,ltdc.txt | 57 +
>> arch/arm/boot/dts/stm32429i-eval.dts | 58 +
>> arch/arm/boot/dts/stm32f429.dtsi | 25 +-
>> arch/arm/configs/stm32_defconfig | 5 +
>> drivers/gpu/drm/Kconfig | 2 +
>> drivers/gpu/drm/Makefile | 1 +
>> drivers/gpu/drm/panel/panel-simple.c | 29 +
>> drivers/gpu/drm/st/Kconfig | 14 +
>> drivers/gpu/drm/st/Makefile | 7 +
>> drivers/gpu/drm/st/drv.c | 279 ++++
>> drivers/gpu/drm/st/drv.h | 25 +
>> drivers/gpu/drm/st/ltdc.c | 1438 ++++++++++++++++++++
>> drivers/gpu/drm/st/ltdc.h | 20 +
>> 14 files changed, 1966 insertions(+), 1 deletion(-)
>> create mode 100644 Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt
>> create mode 100644 Documentation/devicetree/bindings/display/st,ltdc.txt
>> create mode 100644 drivers/gpu/drm/st/Kconfig
>> create mode 100644 drivers/gpu/drm/st/Makefile
>> create mode 100644 drivers/gpu/drm/st/drv.c
>> create mode 100644 drivers/gpu/drm/st/drv.h
>> create mode 100644 drivers/gpu/drm/st/ltdc.c
>> create mode 100644 drivers/gpu/drm/st/ltdc.h
>>
>
> Hi Yannick,
>
> Shouldn't be more logical to use stm32 for the driver instead of st ?
> It would eventually collude with the other STMicroelectronics SoCs and
> will be aligned with other drivers like stm32-rtc, stm32-i2c, ...
>
> Neil
>��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
