Andreas Färber <afaerber@xxxxxxx> writes: > Add an SDIO reset GPIO and enable the serial used by the AP6255 > Bluetooth module. Based on work by Martin Blumenstingl. > > Signed-off-by: Andreas Färber <afaerber@xxxxxxx> > --- > arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts | 11 ++++++++++- > 1 file changed, 10 insertions(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts > index 9f04fa4e5aec..6ea225f584bd 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-rbox-pro.dts > @@ -58,6 +58,7 @@ > > aliases { > serial0 = &uart_AO; > + serial1 = &uart_A; > }; > > chosen { > @@ -122,7 +123,8 @@ > > sdio_pwrseq: sdio-pwrseq { > compatible = "mmc-pwrseq-simple"; > - reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; > + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>, > + <&gpio GPIOX_17 GPIO_ACTIVE_LOW>; > clocks = <&wifi32k>; > clock-names = "ext_clock"; c.f. thread on Martin's series. I don't like this (ab)use of reset-gpios for sdio-pwrseq, and there's some work coming that will make this much cleaner. So, I'll hold off on this until the other solution is ready. Kevin -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html