Re: [PATCH v2 2/5] fbdev: ssd1307fb: Remove reset-active-low from the DT binding document

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Fri, Jan 13, 2017 at 12:35:46PM +0200, Jyri Sarha wrote:
> Remove reset-active-low from the devicetree binding document. The actual
> implementation has never been there in the driver code and there is no
> reason to add it because the gpiod API supports gpio flags, including
> GPIO_ACTIVE_LOW, directly trough its own devicetree binding.
> 
> Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
> ---
>  Documentation/devicetree/bindings/display/ssd1307fb.txt | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt
> index eb31ed4..4aee67f 100644
> --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
> +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt
> @@ -8,14 +8,14 @@ Required properties:
>           0x3c or 0x3d
>    - pwm: Should contain the pwm to use according to the OF device tree PWM
>           specification [0]. Only required for the ssd1307.
> -  - reset-gpios: Should contain the GPIO used to reset the OLED display
> +  - reset-gpios: Should contain the GPIO used to reset the OLED display. See
> +                 Documentation/devicetree/bindings/gpio/gpio.txt for details.

You need to define the active state. Does the active state actually 
vary? Sounds like the compatible is not specific enough unless some 
boards have an inverter.

>    - solomon,height: Height in pixel of the screen driven by the controller
>    - solomon,width: Width in pixel of the screen driven by the controller
>    - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is
>      mapped to.
>  
>  Optional properties:
> -  - reset-active-low: Is the reset gpio is active on physical low?
>    - solomon,segment-no-remap: Display needs normal (non-inverted) data column
>                                to segment mapping
>    - solomon,com-seq: Display uses sequential COM pin configuration
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux