Hello everyone,
hopefully we have reached last iteration on this simple driver.
After having clarified the read_raw() measure unit question, I'm now sending
out v5 addressing Jonathan's comment on having spi destination aligned to
their own cache lines to support DMA-capable SPI controllers.
Also, I added indio_dev->name attribute, as suggested by Lars-Peter even if
the same value can be retrieved from of_node/name.
v1 -> v2:
- incorporated pmeerw's review comments
- retrieve vref from dts and use that to convert read_raw result
to mV
- add device tree bindings documentation
v2 -> v3:
- add _SCALE bit of read_raw function and change _RAW bit accordingly
- call regulator_get_voltage when accessing the _SCALE part of read_raw
and not during probe
- add back remove function as regulator has to be disabled when detaching
the module. Do not use devm_ version of iio_register/unregister functions
anymore but do unregister in the remove.
- remove mutex as access to SPI bus is protected by SPI core. Thanks marex
v3 -> v4:
- split device tree binding documentation and actual ADC driver
- add "reg" to the list of required properties and use a better
namimg for the adc device node in bindings documentation as suggested
by Geert.
v4 -> v5:
- make spi_read() destination buffer cacheline aligned
- add indio_dev->name attribute.
Jacopo Mondi (2):
iio: adc: Add Maxim MAX11100 driver
dt-bindings: iio: document MAX11100 ADC
.../devicetree/bindings/iio/adc/max11100.txt | 19 ++
drivers/iio/adc/Kconfig | 9 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/max11100.c | 192 +++++++++++++++++++++
4 files changed, 221 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/adc/max11100.txt
create mode 100644 drivers/iio/adc/max11100.c
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
