As a temporary solution to enable DSS for selected boards when booting with DT, a hack was added to board-generic.c in 63d5fc0c2f748e20f38a0a0ec1c8494bddf5c288 (OMAP: board-generic: enable DSS for panda & sdp boards). We're now adding proper DT support, so the hack can be removed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx> --- arch/arm/mach-omap2/Makefile | 2 +- arch/arm/mach-omap2/dss-common.c | 259 ------------------------------------- arch/arm/mach-omap2/dss-common.h | 13 -- arch/arm/mach-omap2/pdata-quirks.c | 4 - 4 files changed, 1 insertion(+), 277 deletions(-) delete mode 100644 arch/arm/mach-omap2/dss-common.c delete mode 100644 arch/arm/mach-omap2/dss-common.h diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index adcef406ff0a..e81dbf202a6d 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -296,4 +296,4 @@ endif emac-$(CONFIG_TI_DAVINCI_EMAC) := am35xx-emac.o obj-y += $(emac-m) $(emac-y) -obj-y += common-board-devices.o twl-common.o dss-common.o +obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c deleted file mode 100644 index dadccc91488c..000000000000 --- a/arch/arm/mach-omap2/dss-common.c +++ /dev/null @@ -1,259 +0,0 @@ -/* - * Copyright (C) 2012 Texas Instruments, Inc.. - * Author: Tomi Valkeinen <tomi.valkeinen@xxxxxx> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * - */ - -/* - * NOTE: this is a transitional file to help with DT adaptation. - * This file will be removed when DSS supports DT. - */ - -#include <linux/kernel.h> -#include <linux/gpio.h> -#include <linux/platform_device.h> - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> - -#include "soc.h" -#include "dss-common.h" -#include "mux.h" - -#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ -#define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ -#define HDMI_GPIO_HPD 63 /* Hotplug detect */ - -#define PANDA_DVI_TFP410_POWER_DOWN_GPIO 0 - -/* DVI Connector */ -static struct connector_dvi_platform_data omap4_panda_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 2, -}; - -static struct platform_device omap4_panda_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &omap4_panda_dvi_connector_pdata, -}; - -/* TFP410 DPI-to-DVI chip */ -static struct encoder_tfp410_platform_data omap4_panda_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = PANDA_DVI_TFP410_POWER_DOWN_GPIO, -}; - -static struct platform_device omap4_panda_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &omap4_panda_tfp410_pdata, -}; - -/* HDMI Connector */ -static struct connector_hdmi_platform_data omap4_panda_hdmi_connector_pdata = { - .name = "hdmi", - .source = "tpd12s015.0", -}; - -static struct platform_device omap4_panda_hdmi_connector_device = { - .name = "connector-hdmi", - .id = 0, - .dev.platform_data = &omap4_panda_hdmi_connector_pdata, -}; - -/* TPD12S015 HDMI ESD protection & level shifter chip */ -static struct encoder_tpd12s015_platform_data omap4_panda_tpd_pdata = { - .name = "tpd12s015.0", - .source = "hdmi.0", - - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct platform_device omap4_panda_tpd_device = { - .name = "tpd12s015", - .id = 0, - .dev.platform_data = &omap4_panda_tpd_pdata, -}; - -static struct omap_dss_board_info omap4_panda_dss_data = { - .default_display_name = "dvi", -}; - -void __init omap4_panda_display_init_of(void) -{ - omap_display_init(&omap4_panda_dss_data); - - platform_device_register(&omap4_panda_tfp410_device); - platform_device_register(&omap4_panda_dvi_connector_device); - - platform_device_register(&omap4_panda_tpd_device); - platform_device_register(&omap4_panda_hdmi_connector_device); -} - - -/* OMAP4 Blaze display data */ - -#define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ -#define DLP_POWER_ON_GPIO 40 - -static struct panel_dsicm_platform_data dsi1_panel = { - .name = "lcd", - .source = "dsi.0", - .reset_gpio = 102, - .use_ext_te = false, - .ext_te_gpio = 101, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct platform_device sdp4430_lcd_device = { - .name = "panel-dsi-cm", - .id = 0, - .dev.platform_data = &dsi1_panel, -}; - -static struct panel_dsicm_platform_data dsi2_panel = { - .name = "lcd2", - .source = "dsi.1", - .reset_gpio = 104, - .use_ext_te = false, - .ext_te_gpio = 103, - .pin_config = { - .num_pins = 6, - .pins = { 0, 1, 2, 3, 4, 5 }, - }, -}; - -static struct platform_device sdp4430_lcd2_device = { - .name = "panel-dsi-cm", - .id = 1, - .dev.platform_data = &dsi2_panel, -}; - -/* HDMI Connector */ -static struct connector_hdmi_platform_data sdp4430_hdmi_connector_pdata = { - .name = "hdmi", - .source = "tpd12s015.0", -}; - -static struct platform_device sdp4430_hdmi_connector_device = { - .name = "connector-hdmi", - .id = 0, - .dev.platform_data = &sdp4430_hdmi_connector_pdata, -}; - -/* TPD12S015 HDMI ESD protection & level shifter chip */ -static struct encoder_tpd12s015_platform_data sdp4430_tpd_pdata = { - .name = "tpd12s015.0", - .source = "hdmi.0", - - .ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD, - .ls_oe_gpio = HDMI_GPIO_LS_OE, - .hpd_gpio = HDMI_GPIO_HPD, -}; - -static struct platform_device sdp4430_tpd_device = { - .name = "tpd12s015", - .id = 0, - .dev.platform_data = &sdp4430_tpd_pdata, -}; - - -static struct omap_dss_board_info sdp4430_dss_data = { - .default_display_name = "lcd", -}; - -/* - * we select LCD2 by default (instead of Pico DLP) by setting DISPLAY_SEL_GPIO. - * Setting DLP_POWER_ON gpio enables the VDLP_2V5 VDLP_1V8 and VDLP_1V0 rails - * used by picodlp on the 4430sdp platform. Keep this gpio disabled as LCD2 is - * selected by default - */ -void __init omap_4430sdp_display_init_of(void) -{ - int r; - - r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH, - "display_sel"); - if (r) - pr_err("%s: Could not get display_sel GPIO\n", __func__); - - r = gpio_request_one(DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW, - "DLP POWER ON"); - if (r) - pr_err("%s: Could not get DLP POWER ON GPIO\n", __func__); - - omap_display_init(&sdp4430_dss_data); - - platform_device_register(&sdp4430_lcd_device); - platform_device_register(&sdp4430_lcd2_device); - - platform_device_register(&sdp4430_tpd_device); - platform_device_register(&sdp4430_hdmi_connector_device); -} - - -/* OMAP3 IGEPv2 data */ - -#define IGEP2_DVI_TFP410_POWER_DOWN_GPIO 170 - -/* DVI Connector */ -static struct connector_dvi_platform_data omap3_igep2_dvi_connector_pdata = { - .name = "dvi", - .source = "tfp410.0", - .i2c_bus_num = 2, -}; - -static struct platform_device omap3_igep2_dvi_connector_device = { - .name = "connector-dvi", - .id = 0, - .dev.platform_data = &omap3_igep2_dvi_connector_pdata, -}; - -/* TFP410 DPI-to-DVI chip */ -static struct encoder_tfp410_platform_data omap3_igep2_tfp410_pdata = { - .name = "tfp410.0", - .source = "dpi.0", - .data_lines = 24, - .power_down_gpio = IGEP2_DVI_TFP410_POWER_DOWN_GPIO, -}; - -static struct platform_device omap3_igep2_tfp410_device = { - .name = "tfp410", - .id = 0, - .dev.platform_data = &omap3_igep2_tfp410_pdata, -}; - -static struct omap_dss_board_info igep2_dss_data = { - .default_display_name = "dvi", -}; - -void __init omap3_igep2_display_init_of(void) -{ - omap_display_init(&igep2_dss_data); - - platform_device_register(&omap3_igep2_tfp410_device); - platform_device_register(&omap3_igep2_dvi_connector_device); -} diff --git a/arch/arm/mach-omap2/dss-common.h b/arch/arm/mach-omap2/dss-common.h deleted file mode 100644 index a9becf0d5be8..000000000000 --- a/arch/arm/mach-omap2/dss-common.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __OMAP_DSS_COMMON__ -#define __OMAP_DSS_COMMON__ - -/* - * NOTE: this is a transitional file to help with DT adaptation. - * This file will be removed when DSS supports DT. - */ - -void __init omap4_panda_display_init_of(void); -void __init omap_4430sdp_display_init_of(void); -void __init omap3_igep2_display_init_of(void); - -#endif diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 39f020c982e8..acc72a002316 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -18,7 +18,6 @@ #include "common.h" #include "common-board-devices.h" -#include "dss-common.h" #include "control.h" struct pdata_init { @@ -80,7 +79,6 @@ static void __init hsmmc2_internal_input_clk(void) static void __init omap3_igep0020_legacy_init(void) { - omap3_igep2_display_init_of(); } static void __init omap3_evm_legacy_init(void) @@ -97,14 +95,12 @@ static void __init omap3_zoom_legacy_init(void) #ifdef CONFIG_ARCH_OMAP4 static void __init omap4_sdp_legacy_init(void) { - omap_4430sdp_display_init_of(); legacy_init_wl12xx(WL12XX_REFCLOCK_26, WL12XX_TCXOCLOCK_26, 53); } static void __init omap4_panda_legacy_init(void) { - omap4_panda_display_init_of(); legacy_init_ehci_clk("auxclk3_ck"); legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 53); } -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html