On 01/17/2017 06:26 AM, Bartosz Golaszewski wrote:
Add DT bindings for the TI DA850 AHCI SATA controller.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
---
Documentation/devicetree/bindings/ata/ahci-da850.txt | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txt
diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt
new file mode 100644
index 0000000..e7111b4
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt
@@ -0,0 +1,18 @@
+Device tree binding for the TI DA850 AHCI SATA Controller
+---------------------------------------------------------
+
+Required properties:
+ - compatible: must be "ti,da850-ahci"
+ - reg: physical base addresses and sizes of the controller's register areas
+ - interrupts: interrupt specifier (refer to the interrupt binding)
+
+Optional properties:
+ - clocks: clock specifier (refer to the common clock binding)
Won't you also need a clock-names property since there are two clocks?
+
+Example:
+
+ sata: ahci@218000 {
+ compatible = "ti,da850-ahci";
+ reg = <0x218000 0x2000>, <0x22c018 0x4>;
+ interrupts = <67>;
+ };
It would be nice to have clocks and clock-names in the example as well.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
