Enable the SATA node for da850-lcdk. We omit the pinctrl property on purpose - the muxed SATA pins are not hooked up to anything SATA-related on the lcdk. The REFCLKN/P rate on the board is 100MHz, so we need a multiplier of 15 for 1.5GHz PLL rate. Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> --- arch/arm/boot/dts/da850-lcdk.dts | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..fbeee3c 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -105,6 +105,10 @@ status = "okay"; }; +&sata { + status = "okay"; +}; + &mdio { pinctrl-names = "default"; pinctrl-0 = <&mdio_pins>; -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html