On 17/01/17 00:12, Dave Gerlach wrote:
On 01/13/2017 08:40 PM, Rob Herring wrote:
On Fri, Jan 13, 2017 at 2:28 PM, Dave Gerlach <d-gerlach@xxxxxx> wrote:
On 01/13/2017 01:25 PM, Rob Herring wrote:
On Thu, Jan 12, 2017 at 9:27 AM, Dave Gerlach <d-gerlach@xxxxxx> wrote:
Rob,
On 01/11/2017 03:34 PM, Rob Herring wrote:
On Mon, Jan 9, 2017 at 11:57 AM, Dave Gerlach <d-gerlach@xxxxxx>
wrote:
Rob,
On 01/09/2017 11:50 AM, Rob Herring wrote:
On Wed, Jan 04, 2017 at 02:55:34PM -0600, Dave Gerlach wrote:
Add a generic power domain implementation, TI SCI PM Domains, that
will hook into the genpd framework and allow the TI SCI
protocol to
control device power states.
Also, provide macros representing each device index as understood
by TI SCI to be used in the device node power-domain references.
These are identifiers for the K2G devices managed by the PMMC.
Signed-off-by: Nishanth Menon <nm@xxxxxx>
Signed-off-by: Dave Gerlach <d-gerlach@xxxxxx>
---
v2->v3:
Update k2g_pds node docs to show it should be a child
of pmmc
node.
In early versions a phandle was used to point to pmmc and
docs
still
incorrectly showed this.
.../devicetree/bindings/soc/ti/sci-pm-domain.txt | 59
++++++++++++++
MAINTAINERS | 2 +
include/dt-bindings/genpd/k2g.h | 90
++++++++++++++++++++++
3 files changed, 151 insertions(+)
create mode 100644
Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
create mode 100644 include/dt-bindings/genpd/k2g.h
diff --git
a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
new file mode 100644
index 000000000000..4c9064e512cb
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
@@ -0,0 +1,59 @@
+Texas Instruments TI-SCI Generic Power Domain
+---------------------------------------------
+
+Some TI SoCs contain a system controller (like the PMMC, etc...)
that
is
+responsible for controlling the state of the IPs that are
present.
+Communication between the host processor running an OS and the
system
+controller happens through a protocol known as TI-SCI [1].
This pm
domain
+implementation plugs into the generic pm domain framework and
makes
use
of
+the TI SCI protocol power on and off each device when needed.
+
+[1] Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+PM Domain Node
+==============
+The PM domain node represents the global PM domain managed by the
PMMC,
+which in this case is the single implementation as documented
by the
generic
+PM domain bindings in
Documentation/devicetree/bindings/power/power_domain.txt.
+Because this relies on the TI SCI protocol to communicate with
the
PMMC
it
+must be a child of the pmmc node.
+
+Required Properties:
+--------------------
+- compatible: should be "ti,sci-pm-domain"
+- #power-domain-cells: Must be 0.
+
+Example (K2G):
+-------------
+ pmmc: pmmc {
+ compatible = "ti,k2g-sci";
+ ...
+
+ k2g_pds: k2g_pds {
+ compatible = "ti,sci-pm-domain";
+ #power-domain-cells = <0>;
+ };
+ };
+
+PM Domain Consumers
+===================
+Hardware blocks that require SCI control over their state must
provide
+a reference to the sci-pm-domain they are part of and a unique
device
+specific ID that identifies the device.
+
+Required Properties:
+--------------------
+- power-domains: phandle pointing to the corresponding PM domain
node.
+- ti,sci-id: index representing the device id to be passed
oevr SCI
to
+ be used for device control.
As I've already stated before, this goes in power-domain cells.
When
you
have a single thing (i.e. node) that controls multiple things, then
you
you need to specify the ID for each of them in phandle args.
This is
how
irqs, gpio, clocks, *everything* in DT works.
You think the reasoning for doing it this way provided by both
Ulf and
myself on v2 [1] is not valid then?
From Ulf:
To me, the TI SCI ID, is similar to a "conid" for any another
"device
resource" (like clock, pinctrl, regulator etc) which we can describe
in DT and assign to a device node. The only difference here, is that
we don't have common API to fetch the resource (like clk_get(),
regulator_get()), but instead we fetches the device's resource from
SoC specific code, via genpd's device ->attach() callback.
Sorry, but that sounds like a kernel problem to me and has nothing to
do with DT bindings.
From me:
Yes, you've pretty much hit it on the head. It is not an index
into a
list
of genpds but rather identifies the device *within* a single
genpd. It
is
a
property specific to each device that resides in a ti-sci-genpd,
not a
mapping describing which genpd the device belongs to. The generic
power
domain binding is concerned with mapping the device to a specific
genpd,
which is does fine for us, but we have a sub mapping for devices
that
exist
inside a genpd which, we must describe as well, hence the ti,sci-id.
So to summarize, the genpd framework does interpret the phandle
arg as
an
index into multiple genpds, just as you've said other frameworks do,
but
this is not what I am trying to do, we have multiple devices within
this
*single* genpd, hence the need for the ti,sci-id property.
Fix the genpd framework rather than work around it in DT.
I still disagree that this has nothing to do with DT bindings, as the
current DT binding represents something different already. I am
trying to
extend it to give me additional information needed for our
platforms. Are
you saying that we should break what the current DT binding already
represents to mean something else?
No idea because what's the current binding? From the patch, looks like
a new binding to me.
Yes, ti,sci-id is a new binding. I am referring to the current
meaning of
the "power-domains" binding, which is where you are asking this
property to
be added, in "power-domains" cells. This is documented here [1] in the
kernel, although looking at it I must admit it is not very clear.
The power-domains cell represents an offset into an array of power
domains,
if you choose to use it. That's what the genpd framework is hard
coded to
interpret it as. This is correct, as it is an index into a static
list of
power domains, used to identify which power domain a device belongs to,
which is exactly what the genpd framework itself is concerned with.
This is
already how it is used in the kernel today.
Strictly speaking, the cells are purely for the interpretation of the
phandle they are associated with. If some controller wants to have 20
cells, then it could assuming a good reason. The reality is we tend to
align the meaning of the cells. If genpd is interpreting the cells and
not letting the driver for the power domain controller interpret them,
then still, genpd needs to be fixed.
Ok, perhaps the genpd folks on the thread can jump in here with any
thoughts that they have.
IIRC, initially it was said genpd required 0 cells, hence my confusion.
My ti,sci-id is not an index into a list of power domains, so it
should not
go in the power-domains cells and go against what the power-domains
binding
says that the cell expects. We have one single power domain, and the new
ti,sci-id binding is not something the genpd framework itself is
concerned
with as it's our property to identify a device inside a power domain,
not to
identify which power domain it is associated with.
What is the id used for? I can understand why you need to know what
power domain a device is in (as power-domains identifies), but not
what devices are in a power domain.
We have a system control processor that provides power management
services to the OS and it responsible for handling the power state of
each device. This control happens over a communication interface we have
called TI SCI (implemented at drivers/firmware/ti-sci.c). The
communication protocol uses these ids to identify each device within the
power domain so that the control processor can do what is necessary to
enable that device.
I think a minor detail here that Rob might be missing right now is, that
the ti,sci-id is only controlling the PM runtime handling, and providing
the ID per-device for this purpose only. AFAIK, it is not really
connected to the power domain anymore as such, as we don't have
power-domains / per device anymore as was the case in some earlier
revision of this work.
One could argue though that the whole usage of power-domains is now
moot, as we basically only have implemented one genpd in the whole SoC,
which doesn't really reflect the reality. I wonder if better approach
would be to have this replaced with proper power domains at some point
(if needed), and just have a runtime-pm implementation in place for the
devices that require it.
So, as an example in DT, we would only have:
uart0: serial@02530c00 {
compatible = "xyz";
...
ti,sci-id = <K2G_DEV_UART0>;
};
This is somewhat analogous to what OMAP family of SoCs have in place
now, under "ti,hwmods" property. I also wonder if the "ti,sci-id" should
be replaced with something like "ti,sci-dev-id" to make its purpose clearer.
-Tero
Regards,
Dave
Rob
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
