Re: [PATCHv10 10/41] CLK: TI: add support for clockdomain binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 12/15/2013 06:23 AM, Mike Turquette wrote:
Quoting Tero Kristo (2013-11-26 00:05:51)
Some OMAP clocks require knowledge about their parent clockdomain for
book keeping purposes. This patch creates a new DT binding for TI
clockdomains, which act as a collection of device clocks.

Signed-off-by: Tero Kristo <t-kristo@xxxxxx>
---
  .../devicetree/bindings/clock/ti/clockdomain.txt   |   21 ++++++
  arch/arm/mach-omap2/clock.h                        |    1 -
  drivers/clk/ti/Makefile                            |    3 +-
  drivers/clk/ti/clockdomain.c                       |   70 ++++++++++++++++++++
  include/linux/clk/ti.h                             |    3 +
  5 files changed, 96 insertions(+), 2 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/clock/ti/clockdomain.txt
  create mode 100644 drivers/clk/ti/clockdomain.c

diff --git a/Documentation/devicetree/bindings/clock/ti/clockdomain.txt b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
new file mode 100644
index 0000000..45e6f7c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/clockdomain.txt
@@ -0,0 +1,21 @@
+Binding for Texas Instruments clockdomain.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. Every clock on

The patch looks fine to me but I think that the binding description
should capture the fact that you are re-using the common clock binding
but that this binding definition does not define any new clocks or clock
controllers in the way that a typical clock binding would.

This code uses the 'clocks' property the same way that any other
consumer binding definition would, such as an MMC controller or UART.
Those bindings do not say that they are based on the common clock
binding AFAIK.


Ok, will modify the doc accordingly.

-Tero

Regards,
Mike

+TI SoC belongs to one clockdomain, but software only needs this
+information for specific clocks which require their parent
+clockdomain to be controlled when the clock is enabled/disabled.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,clockdomain"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of clocks within this domain
+
+Examples:
+       dss_clkdm: dss_clkdm {
+               compatible = "ti,clockdomain";
+               clocks = <&dss1_alwon_fck_3430es2>, <&dss_ick_3430es2>;
+       };
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index bc0f9fc..6bd72b5 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -38,7 +38,6 @@ struct omap_clk {
         }

  struct clockdomain;
-#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)

  #define DEFINE_STRUCT_CLK(_name, _parent_array_name, _clkops_name)     \
         static struct clk _name = {                             \
diff --git a/drivers/clk/ti/Makefile b/drivers/clk/ti/Makefile
index 7cba389..67056fb 100644
--- a/drivers/clk/ti/Makefile
+++ b/drivers/clk/ti/Makefile
@@ -1,4 +1,5 @@
  ifneq ($(CONFIG_OF),)
  obj-y                                  += clk.o dpll.o autoidle.o divider.o \
-                                          fixed-factor.o gate.o composite.o
+                                          fixed-factor.o gate.o clockdomain.o \
+                                          composite.o
  endif
diff --git a/drivers/clk/ti/clockdomain.c b/drivers/clk/ti/clockdomain.c
new file mode 100644
index 0000000..f1e0038
--- /dev/null
+++ b/drivers/clk/ti/clockdomain.c
@@ -0,0 +1,70 @@
+/*
+ * OMAP clockdomain support
+ *
+ * Copyright (C) 2013 Texas Instruments, Inc.
+ *
+ * Tero Kristo <t-kristo@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk/ti.h>
+
+#undef pr_fmt
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+static void __init of_ti_clockdomain_setup(struct device_node *node)
+{
+       struct clk *clk;
+       struct clk_hw *clk_hw;
+       const char *clkdm_name = node->name;
+       int i;
+       int num_clks;
+
+       num_clks = of_count_phandle_with_args(node, "clocks", "#clock-cells");
+
+       for (i = 0; i < num_clks; i++) {
+               clk = of_clk_get(node, i);
+               if (__clk_get_flags(clk) & CLK_IS_BASIC) {
+                       pr_warn("can't setup clkdm for basic clk %s\n",
+                               __clk_get_name(clk));
+                       continue;
+               }
+               clk_hw = __clk_get_hw(clk);
+               to_clk_hw_omap(clk_hw)->clkdm_name = clkdm_name;
+               omap2_init_clk_clkdm(clk_hw);
+       }
+}
+
+static struct of_device_id ti_clkdm_match_table[] __initdata = {
+       { .compatible = "ti,clockdomain" },
+       { }
+};
+
+/**
+ * ti_dt_clockdomains_setup - setup device tree clockdomains
+ *
+ * Initializes clockdomain nodes for a SoC. This parses through all the
+ * nodes with compatible = "ti,clockdomain", and add the clockdomain
+ * info for all the clocks listed under these. This function shall be
+ * called after rest of the DT clock init has completed and all
+ * clock nodes have been registered.
+ */
+void __init ti_dt_clockdomains_setup(void)
+{
+       struct device_node *np;
+       for_each_matching_node(np, ti_clkdm_match_table) {
+               of_ti_clockdomain_setup(np);
+       }
+}
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
index 872ff2a..231b071 100644
--- a/include/linux/clk/ti.h
+++ b/include/linux/clk/ti.h
@@ -204,6 +204,8 @@ struct clk_omap_reg {
         u16 index;
  };

+#define to_clk_hw_omap(_hw) container_of(_hw, struct clk_hw_omap, hw)
+
  void omap2_init_clk_hw_omap_clocks(struct clk *clk);
  int omap3_noncore_dpll_enable(struct clk_hw *hw);
  void omap3_noncore_dpll_disable(struct clk_hw *hw);
@@ -232,6 +234,7 @@ int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
  void __iomem *ti_clk_get_reg_addr(struct device_node *node, int index);
  void ti_dt_clocks_register(struct ti_dt_clk *oclks);
  void ti_dt_clk_init_provider(struct device_node *np, int index);
+void ti_dt_clockdomains_setup(void);
  int of_ti_clk_autoidle_setup(struct device_node *node);
  int ti_clk_add_component(struct device_node *node, struct clk_hw *hw, int type);

--
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux