On 01/16/2017 02:55 PM, Rafał Miłecki wrote: > On 16 January 2017 at 14:35, Uwe Kleine-König > <u.kleine-koenig@xxxxxxxxxxxxxx> wrote: >> The MR25 family doesn't support JEDEC, so they need explicit mentioning >> in the list of supported spi IDs. This makes it possible to add these >> using for example: >> >> compatible = "everspin,mr25h40"; >> >> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> >> --- >> Hello, >> >> independent of the decision if -nonjedec is ok for m25p, this is needed >> to make Everspin's MRAMs work. >> >> Best regards >> Uwe >> >> drivers/mtd/devices/m25p80.c | 5 +++++ >> 1 file changed, 5 insertions(+) >> >> diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c >> --- a/drivers/mtd/devices/m25p80.c >> +++ b/drivers/mtd/devices/m25p80.c >> @@ -305,6 +305,11 @@ static const struct spi_device_id m25p_ids[] = { >> {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"}, >> {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"}, >> >> + /* Everspin MRAMs without JEDEC support */ >> + { "mr25h256" }, /* 256 kib, 40 MHz */ > > A trivial thing: I think it should be Kib > https://en.wikipedia.org/wiki/Binary_prefix > Except for that, it looks good IMO. -- Best regards, Marek Vasut -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html