Re: [PATCH 3/3] iio: adc: ti-ads7950: Change regulator matching string to "vref"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 14/01/17 18:09, David Lechner wrote:
> On 01/14/2017 06:52 AM, Jonathan Cameron wrote:
>> On 11/01/17 17:52, David Lechner wrote:
>>> This changes the reference voltage regulator matching string from "refin"
>>> to "vref". This is to be consistent with other A/DC chips that also use
>>> "vref-supply" in their device tree bindings.
>>>
>>> Signed-off-by: David Lechner <david@xxxxxxxxxxxxxx>
>>> ---
>>>  drivers/iio/adc/ti-ads7950.c | 6 +++---
>> Again, we missed this before and it would have been nice to have
>> had it as vref (which is matches the datasheet).  The question
>> becomes how do we handle this going forward with no risk of breaking
>> existing device trees.  We may have to do an optional get on one
>> name and then a non optional on the second. It's ugly, but
>> would fix this up in a 'safe' way.
>>
> 
> Again, I don't think it is too late since this driver only exists in the iio/testing branch.
Applied to the togreg branch of iio.git and pushed out as testing for
the autobuilders to play with it.

Thanks,

Jonathan
> 
>> Jonathan
>>>  1 file changed, 3 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/iio/adc/ti-ads7950.c b/drivers/iio/adc/ti-ads7950.c
>>> index b587fa6..16a0663 100644
>>> --- a/drivers/iio/adc/ti-ads7950.c
>>> +++ b/drivers/iio/adc/ti-ads7950.c
>>> @@ -411,15 +411,15 @@ static int ti_ads7950_probe(struct spi_device *spi)
>>>      spi_message_init_with_transfers(&st->scan_single_msg,
>>>                      st->scan_single_xfer, 3);
>>>
>>> -    st->reg = devm_regulator_get(&spi->dev, "refin");
>>> +    st->reg = devm_regulator_get(&spi->dev, "vref");
>>>      if (IS_ERR(st->reg)) {
>>> -        dev_err(&spi->dev, "Failed get get regulator \"refin\"\n");
>>> +        dev_err(&spi->dev, "Failed get get regulator \"vref\"\n");
>>>          return PTR_ERR(st->reg);
>>>      }
>>>
>>>      ret = regulator_enable(st->reg);
>>>      if (ret) {
>>> -        dev_err(&spi->dev, "Failed to enable regulator \"refin\"\n");
>>> +        dev_err(&spi->dev, "Failed to enable regulator \"vref\"\n");
>>>          return ret;
>>>      }
>>>
>>>
>>
> 
> -- 
> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux