When VDMA is configured for more than one frame in the h/w.
For example h/w is configured for n number of frames, user
Submits n number of frames and triggered the DMA using issue_pending API.
In the current driver flow we are submitting one frame at a time,
But we should submit all the n number of frames at one time
As the h/w is configured for n number of frames.
This patch fixes this issue.
Acked-by: Rob Herring <robh@xxxxxxxxxx>
Reviewed-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>
---
Changes for v6:
---> Added Rob Acked-by
---> Updated commit message as suggested by Vinod.
Changes for v5:
---> Updated xlnx,fstore-config property to xlnx,fstore-enable
and updated description as suggested by Rob.
Changes for v4:
---> Add Check for framestore configuration on Transmit case as well
as suggested by Jose Abreu.
---> Modified the dev_dbg checks to dev_warn checks as suggested
by Jose Abreu.
Changes for v3:
---> Added Checks for frame store configuration. If frame store
Configuration is not present at the h/w level and user
Submits less frames added debug prints in the driver as relevant.
Changes for v2:
---> Fixed race conditions in the driver as suggested by Jose Abreu
---> Fixed unnecessray if else checks in the vdma_start_transfer
as suggested by Laurent Pinchart.
.../devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 +
drivers/dma/xilinx/xilinx_dma.c | 78 +++++++++++++++-------
2 files changed, 57 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
index a2b8bfa..e951c09 100644
--- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
+++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt
@@ -66,6 +66,8 @@ Optional child node properties:
Optional child node properties for VDMA:
- xlnx,genlock-mode: Tells Genlock synchronization is
enabled/disabled in hardware.
+- xlnx,fstore-enable: boolean; if defined, it indicates that controller
+ supports frame store configuration.
Optional child node properties for AXI DMA:
-dma-channels: Number of dma channels in child node.
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 5eeea57..edb5b71 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -322,6 +322,7 @@ struct xilinx_dma_tx_descriptor {
* @genlock: Support genlock mode
* @err: Channel has errors
* @idle: Check for channel idle
+ * @has_fstoreen: Check for frame store configuration
* @tasklet: Cleanup work after irq
* @config: Device configuration info
* @flush_on_fsync: Flush on Frame sync
@@ -353,6 +354,7 @@ struct xilinx_dma_chan {
bool genlock;
bool err;
bool idle;
+ bool has_fstoreen;
struct tasklet_struct tasklet;
struct xilinx_vdma_config config;
bool flush_on_fsync;
@@ -990,6 +992,27 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
if (list_empty(&chan->pending_list))
return;
+ /*
+ * Note: When VDMA is built with default h/w configuration
+ * User should submit frames upto H/W configured.
+ * If users submits less than h/w configured
+ * VDMA engine tries to write to a invalid location
+ * Results undefined behaviour/memory corruption.
+ *
+ * If user would like to submit frames less than h/w capable
+ * On S2MM side please enable debug info 13 at the h/w level
+ * On MM2S side please enable debug info 6 at the h/w level
+ * It will allows the frame buffers numbers to be modified at runtime.
+ */
+ if (!chan->has_fstoreen &&
+ chan->desc_pendingcount < chan->num_frms) {
+ dev_warn(chan->dev, "Frame Store Configuration is not enabled at the\n");
+ dev_warn(chan->dev, "H/w level enable Debug info 13 or 6 at the h/w level\n");
+ dev_warn(chan->dev, "OR Submit the frames upto h/w Capable\n\r");
+
+ return;
+ }
+
desc = list_first_entry(&chan->pending_list,
struct xilinx_dma_tx_descriptor, node);
tail_desc = list_last_entry(&chan->pending_list,
@@ -1052,25 +1075,38 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
if (chan->has_sg) {
dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC,
tail_segment->phys);
+ list_splice_tail_init(&chan->pending_list, &chan->active_list);
+ chan->desc_pendingcount = 0;
} else {
struct xilinx_vdma_tx_segment *segment, *last = NULL;
- int i = 0;
+ int i = 0, j = 0;
if (chan->desc_submitcount < chan->num_frms)
i = chan->desc_submitcount;
- list_for_each_entry(segment, &desc->segments, node) {
- if (chan->ext_addr)
- vdma_desc_write_64(chan,
- XILINX_VDMA_REG_START_ADDRESS_64(i++),
- segment->hw.buf_addr,
- segment->hw.buf_addr_msb);
- else
- vdma_desc_write(chan,
- XILINX_VDMA_REG_START_ADDRESS(i++),
- segment->hw.buf_addr);
-
- last = segment;
+ for (j = 0; j < chan->num_frms; ) {
+ list_for_each_entry(segment, &desc->segments, node) {
+ if (chan->ext_addr)
+ vdma_desc_write_64(chan,
+ XILINX_VDMA_REG_START_ADDRESS_64(i++),
+ segment->hw.buf_addr,
+ segment->hw.buf_addr_msb);
+ else
+ vdma_desc_write(chan,
+ XILINX_VDMA_REG_START_ADDRESS(i++),
+ segment->hw.buf_addr);
+
+ last = segment;
+ }
+ list_del(&desc->node);
+ list_add_tail(&desc->node, &chan->active_list);
+ j++;
+ if (list_empty(&chan->pending_list) ||
+ (i == chan->num_frms))
+ break;
+ desc = list_first_entry(&chan->pending_list,
+ struct xilinx_dma_tx_descriptor,
+ node);
}
if (!last)
@@ -1081,20 +1117,14 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE,
last->hw.stride);
vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
- }
- chan->idle = false;
- if (!chan->has_sg) {
- list_del(&desc->node);
- list_add_tail(&desc->node, &chan->active_list);
- chan->desc_submitcount++;
- chan->desc_pendingcount--;
+ chan->desc_submitcount += j;
+ chan->desc_pendingcount -= j;
if (chan->desc_submitcount == chan->num_frms)
chan->desc_submitcount = 0;
- } else {
- list_splice_tail_init(&chan->pending_list, &chan->active_list);
- chan->desc_pendingcount = 0;
}
+
+ chan->idle = false;
}
/**
@@ -1342,6 +1372,7 @@ static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
chan->err = false;
chan->idle = true;
+ chan->desc_submitcount = 0;
return err;
}
@@ -2320,6 +2351,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
has_dre = of_property_read_bool(node, "xlnx,include-dre");
chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode");
+ chan->has_fstoreen = of_property_read_bool(node, "xlnx,fstore-enable");
err = of_property_read_u32(node, "xlnx,datawidth", &value);
if (err) {
--
2.1.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
