On 01/13/2017 06:37 AM, Bartosz Golaszewski wrote:
Add DT bindings for the TI DA850 AHCI SATA controller. Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> --- .../devicetree/bindings/ata/ahci-da850.txt | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/ata/ahci-da850.txt diff --git a/Documentation/devicetree/bindings/ata/ahci-da850.txt b/Documentation/devicetree/bindings/ata/ahci-da850.txt new file mode 100644 index 0000000..d07c241 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/ahci-da850.txt @@ -0,0 +1,21 @@ +Device tree binding for the TI DA850 AHCI SATA Controller +--------------------------------------------------------- + +Required properties: + - compatible: must be "ti,da850-ahci" + - reg: physical base addresses and sizes of the controller's register areas + - interrupts: interrupt specifier (refer to the interrupt binding) + +Optional properties: + - clocks: clock specifier (refer to the common clock binding) + - da850,clk_multiplier: the multiplier for the reference clock needed + for 1.5GHz PLL output
A clock multiplier property seems redundant if you are specifying a clock. It should be possible to get the rate from the clock to determine which multiplier is needed.
+ +Example: + + sata: ahci@0x218000 { + compatible = "ti,da850-ahci"; + reg = <0x218000 0x2000>, <0x22c018 0x4>; + interrupts = <67>; + da850,clk_multiplier = <7>; + };
-- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html