* Ravi Babu <ravibabu@xxxxxx> [170113 04:41]:
> The SPL size for DRA74x platform has increased and
> is now more than 64KB. Increase QSPI SPL partition
> size to 256KB for DRA74x EVM.
>
> QSPI partition numbering changes because of this.
And this will break the existing partitions potentially..
See what was discussed on the list few days ago in thread
"[PATCH 1/6] ARM: dts: am335x-phycore-som: Update NAND
partition table".
It's best to have these left empty or as they originally
were and let u-boot configure the partitions.
Regards,
Tony
> Signed-off-by: Ravi Babu <ravibabu@xxxxxx>
> Signed-off-by: Sekhar Nori <nsekhar@xxxxxx>
> ---
> arch/arm/boot/dts/dra7-evm.dts | 24 ++++++------------------
> 1 file changed, 6 insertions(+), 18 deletions(-)
>
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 132f2be..2784241 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -681,41 +681,29 @@
> */
> partition@0 {
> label = "QSPI.SPL";
> - reg = <0x00000000 0x000010000>;
> + reg = <0x00000000 0x000040000>;
> };
> partition@1 {
> - label = "QSPI.SPL.backup1";
> - reg = <0x00010000 0x00010000>;
> - };
> - partition@2 {
> - label = "QSPI.SPL.backup2";
> - reg = <0x00020000 0x00010000>;
> - };
> - partition@3 {
> - label = "QSPI.SPL.backup3";
> - reg = <0x00030000 0x00010000>;
> - };
> - partition@4 {
> label = "QSPI.u-boot";
> reg = <0x00040000 0x00100000>;
> };
> - partition@5 {
> + partition@2 {
> label = "QSPI.u-boot-spl-os";
> reg = <0x00140000 0x00080000>;
> };
> - partition@6 {
> + partition@3 {
> label = "QSPI.u-boot-env";
> reg = <0x001c0000 0x00010000>;
> };
> - partition@7 {
> + partition@4 {
> label = "QSPI.u-boot-env.backup1";
> reg = <0x001d0000 0x0010000>;
> };
> - partition@8 {
> + partition@5 {
> label = "QSPI.kernel";
> reg = <0x001e0000 0x0800000>;
> };
> - partition@9 {
> + partition@6 {
> label = "QSPI.file-system";
> reg = <0x009e0000 0x01620000>;
> };
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
