On 12/01/17 05:50, Daniel Kurtz wrote:
Hi Matthias,
(Trying again to send plain text email)...
On Thu, Aug 4, 2016 at 10:57 AM, Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx> wrote:
To support HDMI 4K resolution, mmsys need clcok
mm_sel to be 400MHz.
The board .dts file should override the clock rate
property with the higher VENCPLL frequency the board
supports HDMI 4K resolution.
Signed-off-by: Bibby Hsieh <bibby.hsieh@xxxxxxxxxxxx>
Reviewed-by: Daniel Kurtz <djkurtz@xxxxxxxxxxxx>
Applied to v4.10-next/dts
Thanks
It looks like this patch was lost. It is actually a prerequisite for
MTK 4k HDMI support, which already landed in v4.9.
See the email thread entitled:
[PATCH v5 0/3] MT8173 HDMI 4K support <https://lkml.org/lkml/2016/9/28/893>
Or these three:
0d2200794f0a drm/mediatek: modify the factor to make the pll_rate set
in the 1G-2G range
968253bd7caa drm/mediatek: enhance the HDMI driving current
d542b7c473f0 drm/mediatek: do mtk_hdmi_send_infoframe after HDMI clock enable
-Dan
---
arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index 78529e4..c3f32f3 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -690,6 +690,8 @@
compatible = "mediatek,mt8173-mmsys", "syscon";
reg = <0 0x14000000 0 0x1000>;
power-domains = <&scpsys MT8173_POWER_DOMAIN_MM>;
+ assigned-clocks = <&topckgen CLK_TOP_MM_SEL>;
+ assigned-clock-rates = <400000000>;
#clock-cells = <1>;
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
