Re: [PATCH v8 2/5] i2c: Add STM32F4 I2C driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello,

On Thu, Jan 12, 2017 at 10:28:20PM +0100, M'boumba Cedric Madianga wrote:
> Please see below a quote from datasheet that clearly described how to handle
> For 2-byte reception:
> ● Wait until ADDR = 1 (SCL stretched low until the ADDR flag is cleared)
> ● Set ACK low, set POS high
> ● Clear ADDR flag
> ● Wait until BTF = 1 (Data 1 in DR, Data2 in shift register, SCL
> stretched low until a data1 is read)
> ● Set STOP high
> ● Read data 1 and 2

The problem is that you only know that you have a 2 byte transfer after
you read the first byte (and it's a 1). (But note that this is
irrelevant for the patch as the driver doesn't claim to support this
kind of transfer.)

Best regards
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux