I did not notice the latest update on MAINTAINERS when sending this series. Added Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx> to loop. On 01/12/17 13:16, Jyri Sarha wrote: > We needed these changes for couple of our evm. Everything else is quite > straight forward, but removing the reset-active-low dts property is a > questionable at least in theory. However, in practice if anyone was > using the property in their device-tree blobs, they have never been > able to get desired effect with mainline kernel. > > Jyri Sarha (3): > fbdev: ssd1307fb: Start to use gpiod API for reset gpio > fbdev: ssd1307fb: Remove reset-active-low from the DT binding document > fbdev: ssd1307fb: Make reset gpio devicetree property optional > > Tomi Valkeinen (3): > fbdev/ssd1307fb: add support to enable VBAT > fbdev/ssd1307fb: clear screen in probe > fbdev/ssd1307fb: add support to enable VBAT > > .../devicetree/bindings/display/ssd1307fb.txt | 5 +- > drivers/video/fbdev/ssd1307fb.c | 55 ++++++++++++++-------- > 2 files changed, 38 insertions(+), 22 deletions(-) > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
