From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
SSD1306 needs VBAT when it is wired in charge pump configuration. This
patch adds support to the driver to enable VBAT regulator at init time.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
---
drivers/video/fbdev/ssd1307fb.c | 20 +++++++++++++++++++-
1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 89372af..616a6a3 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -16,6 +16,7 @@
#include <linux/of_gpio.h>
#include <linux/pwm.h>
#include <linux/uaccess.h>
+#include <linux/regulator/consumer.h>
#define SSD1307FB_DATA 0x40
#define SSD1307FB_COMMAND 0x80
@@ -74,6 +75,7 @@ struct ssd1307fb_par {
struct pwm_device *pwm;
u32 pwm_period;
struct gpio_desc *reset;
+ struct regulator *vbat_reg;
u32 seg_remap;
u32 vcomh;
u32 width;
@@ -574,6 +576,14 @@ static int ssd1307fb_probe(struct i2c_client *client,
goto fb_alloc_error;
}
+ par->vbat_reg = devm_regulator_get_optional(&client->dev, "vbat");
+ if (IS_ERR(par->vbat_reg)) {
+ dev_err(&client->dev, "failed to get VBAT regulator: %ld\n",
+ PTR_ERR(par->vbat_reg));
+ ret = PTR_ERR(par->vbat_reg);
+ goto fb_alloc_error;
+ }
+
if (of_property_read_u32(node, "solomon,width", &par->width))
par->width = 96;
@@ -658,9 +668,15 @@ static int ssd1307fb_probe(struct i2c_client *client,
udelay(4);
}
+ ret = regulator_enable(par->vbat_reg);
+ if (ret) {
+ dev_err(&client->dev, "failed to enable VBAT: %d\n", ret);
+ goto reset_oled_error;
+ }
+
ret = ssd1307fb_init(par);
if (ret)
- goto reset_oled_error;
+ goto regulator_enable_error;
ret = register_framebuffer(info);
if (ret) {
@@ -693,6 +709,8 @@ static int ssd1307fb_probe(struct i2c_client *client,
pwm_disable(par->pwm);
pwm_put(par->pwm);
};
+regulator_enable_error:
+ regulator_disable(par->vbat_reg);
reset_oled_error:
fb_deferred_io_cleanup(info);
fb_alloc_error:
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
