Dear Dinh On 12/13/2013 04:30 AM, dinguyen@xxxxxxxxxx wrote:
From: Dinh Nguyen <dinguyen@xxxxxxxxxx> All implementations of the Synopsys DW SD/MMC IP have settings to control the phase shift of the CIU clk. These phase shift settings are necessary for the SD/MMC to correctly clock the card. All variants of the dw_mmc will need these settings, but how they are implemented can vastly vary. This patch enables the setting for the SDR and/or DDR settings through the common clock framework. Depends on the patch "mmc: dw_mmc: Enable the hold reg for certain speed modes", that is already reading the "samsung,dw-mshc-sdr-timing" and "samsung,dw-mshc-ddr-timing" bindings, this patch saves those values into a u32 bitmask that can be passed to the clock framework to use. Signed-off-by: Dinh Nguyen <dinguyen@xxxxxxxxxx> --- v6: Add this patch v5: none v4: none v3: none v2: none --- drivers/mmc/host/dw_mmc.c | 23 +++++++++++++++++++++++ include/linux/mmc/dw_mmc.h | 6 ++++++ 2 files changed, 29 insertions(+) diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 480dafe..1fb5cff 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2431,6 +2431,8 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) if ((sdr_timing[1] == 0) || (ddr_timing[1] == 0)) pdata->cclk_in_drv = 0; + pdata->sdr_timing = (sdr_timing[1] | (sdr_timing[0] << 4)); + pdata->ddr_timing = (ddr_timing[1] | (ddr_timing[0] << 4)); return pdata; } @@ -2478,6 +2480,27 @@ int dw_mci_probe(struct dw_mci *host) dev_dbg(host->dev, "ciu clock not available\n"); host->bus_hz = host->pdata->bus_hz; } else { + /* If the CIU clk is available, we check for SDR and DDR + * timing phase shift settings. But not all platforms + * may have populated these settings, the driver will not fail + * if these settings are not specified. + */ + if (host->pdata->sdr_timing) { + host->sdr_clk = devm_clk_get(host->dev, "sdr_mmc_clk"); + if (IS_ERR(host->sdr_clk)) + dev_dbg(host->dev, "sdr_mmc clock not available\n"); + else + clk_set_rate(host->sdr_clk, host->pdata->sdr_timing); + } + + if (host->pdata->ddr_timing) { + host->ddr_clk = devm_clk_get(host->dev, "ddr_mmc_clk"); + if (IS_ERR(host->ddr_clk)) + dev_dbg(host->dev, "ddr_mmc clock not available\n"); + else + clk_set_rate(host->ddr_clk, host->pdata->ddr_timing); + } +
Just curious, does pdata->sdr_timing and pdata->ddr_timing are fixed, fixed as each controller, or different with different board. In case they are fixed, or fixed in each controller, and only required to be set in probe only once, maybe they can be hide in clk_mmc_ops.prepare And the clock can be used as ciu_clock, or parent of ciu_clock, which is called in dw_mmc.c, maybe these code can be ignored.
ret = clk_prepare_enable(host->ciu_clk); if (ret) { dev_err(host->dev, "failed to enable ciu clock\n"); diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index 2b5b8bf..ad90ad1 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -83,6 +83,8 @@ struct mmc_data; * @priv: Implementation defined private data. * @biu_clk: Pointer to bus interface unit clock instance. * @ciu_clk: Pointer to card interface unit clock instance. + * @sdr_clk: Pointer to the SDR clock instance. + * @ddr_clk: Pointer to the DDR clock instance. * @slot: Slots sharing this MMC controller. * @fifo_depth: depth of FIFO. * @data_shift: log2 of FIFO item size. @@ -170,6 +172,8 @@ struct dw_mci { void *priv; struct clk *biu_clk; struct clk *ciu_clk; + struct clk *sdr_clk; + struct clk *ddr_clk; struct dw_mci_slot *slot[MAX_MCI_SLOTS]; /* FIFO push and pull */ @@ -241,6 +245,8 @@ struct dw_mci_board { u32 caps2; /* More capabilities */ u32 pm_caps; /* PM capabilities */ u32 cclk_in_drv; /*cclk_in_drv phase shift */ + u32 sdr_timing; /* Single data rate timing setting. */ + u32 ddr_timing; /* Double data rate timing setting. */
Are they fixed or not? Thanks Zhangfei -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html