From: "Edward A. James" <eajames@xxxxxxxxxx>
Add code to tie the hwmon sysfs code and the POWER8 OCC code together, as
well as probe the entire driver from the I2C bus. I2C is the communication
method between the BMC and the P8 OCC.
Signed-off-by: Edward A. James <eajames@xxxxxxxxxx>
Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx>
---
Documentation/devicetree/bindings/hwmon/occ.txt | 13 +++
drivers/hwmon/occ/Kconfig | 14 +++
drivers/hwmon/occ/Makefile | 1 +
drivers/hwmon/occ/p8_occ_i2c.c | 123 ++++++++++++++++++++++++
4 files changed, 151 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/occ.txt
create mode 100644 drivers/hwmon/occ/p8_occ_i2c.c
diff --git a/Documentation/devicetree/bindings/hwmon/occ.txt b/Documentation/devicetree/bindings/hwmon/occ.txt
new file mode 100644
index 0000000..b0d2b36
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/occ.txt
@@ -0,0 +1,13 @@
+HWMON I2C driver for IBM POWER CPU OCC (On Chip Controller)
+
+Required properties:
+ - compatible: must be "ibm,p8-occ-i2c"
+ - reg: physical address
+
+Example:
+i2c3: i2c-bus@100 {
+ occ@50 {
+ compatible = "ibm,p8-occ-i2c";
+ reg = <0x50>;
+ };
+};
diff --git a/drivers/hwmon/occ/Kconfig b/drivers/hwmon/occ/Kconfig
index cdb64a7..3a5188f 100644
--- a/drivers/hwmon/occ/Kconfig
+++ b/drivers/hwmon/occ/Kconfig
@@ -13,3 +13,17 @@ menuconfig SENSORS_PPC_OCC
This driver can also be built as a module. If so, the module
will be called occ.
+
+if SENSORS_PPC_OCC
+
+config SENSORS_PPC_OCC_P8_I2C
+ tristate "POWER8 OCC hwmon support"
+ depends on I2C
+ help
+ Provide a hwmon sysfs interface for the POWER8 On-Chip Controller,
+ exposing temperature, frequency and power measurements.
+
+ This driver can also be built as a module. If so, the module will be
+ called p8-occ-i2c.
+
+endif
diff --git a/drivers/hwmon/occ/Makefile b/drivers/hwmon/occ/Makefile
index a6881f9..9294b58 100644
--- a/drivers/hwmon/occ/Makefile
+++ b/drivers/hwmon/occ/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_SENSORS_PPC_OCC) += occ.o occ_sysfs.o
+obj-$(CONFIG_SENSORS_PPC_OCC_P8_I2C) += occ_scom_i2c.o occ_p8.o p8_occ_i2c.o
diff --git a/drivers/hwmon/occ/p8_occ_i2c.c b/drivers/hwmon/occ/p8_occ_i2c.c
new file mode 100644
index 0000000..4515c68
--- /dev/null
+++ b/drivers/hwmon/occ/p8_occ_i2c.c
@@ -0,0 +1,123 @@
+/*
+ * p8_occ_i2c.c - hwmon OCC driver
+ *
+ * This file contains the i2c layer for accessing the P8 OCC over i2c bus.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include "scom.h"
+#include "occ_scom_i2c.h"
+#include "occ_p8.h"
+#include "occ_sysfs.h"
+
+#define P8_OCC_I2C_NAME "p8-occ-i2c"
+
+int p8_i2c_getscom(void *bus, u32 address, u64 *data)
+{
+ /* P8 i2c slave requires address to be shifted by 1 */
+ address = address << 1;
+
+ return occ_i2c_getscom(bus, address, data);
+}
+
+int p8_i2c_putscom(void *bus, u32 address, u32 data0, u32 data1)
+{
+ /* P8 i2c slave requires address to be shifted by 1 */
+ address = address << 1;
+
+ return occ_i2c_putscom(bus, address, data0, data1);
+}
+
+static struct occ_bus_ops p8_bus_ops = {
+ .getscom = p8_i2c_getscom,
+ .putscom = p8_i2c_putscom,
+};
+
+static int p8_occ_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct occ *occ;
+ struct occ_sysfs *hwmon;
+ const u32 *sensor_hwmon_configs = p8_get_sensor_hwmon_configs();
+
+ occ = p8_occ_start(&client->dev, client, &p8_bus_ops);
+ if (IS_ERR(occ))
+ return PTR_ERR(occ);
+
+ hwmon = occ_sysfs_start(&client->dev, occ, sensor_hwmon_configs,
+ P8_OCC_I2C_NAME);
+ if (IS_ERR(hwmon))
+ return PTR_ERR(hwmon);
+
+ i2c_set_clientdata(client, occ);
+
+ return 0;
+}
+
+static int p8_occ_remove(struct i2c_client *client)
+{
+ struct occ *occ = i2c_get_clientdata(client);
+
+ return p8_occ_stop(occ);
+}
+
+/* used by old-style board info. */
+static const struct i2c_device_id occ_ids[] = {
+ { P8_OCC_I2C_NAME, 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, occ_ids);
+
+/* used by device table */
+static const struct of_device_id occ_of_match[] = {
+ { .compatible = "ibm,p8-occ-i2c" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, occ_of_match);
+
+/*
+ * i2c-core uses i2c-detect() to detect device in below address list.
+ * If exists, address will be assigned to client.
+ * It is also possible to read address from device table.
+ */
+static const unsigned short normal_i2c[] = {0x50, 0x51, I2C_CLIENT_END };
+
+static struct i2c_driver p8_occ_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = P8_OCC_I2C_NAME,
+ .pm = NULL,
+ .of_match_table = occ_of_match,
+ },
+ .probe = p8_occ_probe,
+ .remove = p8_occ_remove,
+ .id_table = occ_ids,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(p8_occ_driver);
+
+MODULE_AUTHOR("Eddie James <eajames@xxxxxxxxxx>");
+MODULE_DESCRIPTION("BMC P8 OCC hwmon driver");
+MODULE_LICENSE("GPL");
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
