2017년 01월 11일 16:46에 Andrzej Hajda 이(가) 쓴 글:
> On 11.01.2017 07:33, Hoegeun Kwon wrote:
>> From: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
>>
>> This patch add the panel device tree node for S6E3HA2 display
>> controller to TM2 dts.
>>
>> Signed-off-by: Hyungwon Hwang <human.hwang@xxxxxxxxxxx>
>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>> Signed-off-by: Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx>
>> Tested-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
>> ---
>> arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 12 ++++++++++++
>> 1 file changed, 12 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> index ddba2f8..6d362f9 100644
>> --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts
>> @@ -18,6 +18,18 @@
>> compatible = "samsung,tm2", "samsung,exynos5433";
>> };
>>
>> +&dsi {
>> + panel@0 {
>> + compatible = "samsung,s6e3ha2";
>> + reg = <0>;
>> + vdd3-supply = <&ldo27_reg>;
>> + vci-supply = <&ldo28_reg>;
>> + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
>> + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
>> + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
> The same here (as in 1st comment) , te-gpios should be dropper - decon
> uses hw-trigger.
Reasonable to remove te-gpios property but this change would make MIPI-DSI driver probing to be failed so MIPI-DSI driver should be fixed together.
Thanks.
>
> Regards
> Andrzej
>> + };
>> +};
>> +
>> &hsi2c_9 {
>> status = "okay";
>>
>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
