On Sat, Jan 07, 2017 at 12:15:29PM +0530, Kedareswara rao Appana wrote: > When VDMA is configured for more than one frame in the h/w > for example h/w is configured for n number of frames and user > Submits n number of frames and triggered the DMA using issue_pending API. title case in middle if sentence, no commas, can you make it easier to read please.. > In the current driver flow we are submitting one frame at a time > but we should submit all the n number of frames at one time as the h/w > Is configured for n number of frames. s/Is/is > > This patch fixes this issue. > > Reviewed-by: Jose Abreu <joabreu@xxxxxxxxxxxx> > Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx> > --- > Changes for v5: > ---> Updated xlnx,fstore-config property to xlnx,fstore-enable > and updated description as suggested by Rob. > Changes for v4: > ---> Add Check for framestore configuration on Transmit case as well > as suggested by Jose Abreu. > ---> Modified the dev_dbg checks to dev_warn checks as suggested > by Jose Abreu. > Changes for v3: > ---> Added Checks for frame store configuration. If frame store > Configuration is not present at the h/w level and user > Submits less frames added debug prints in the driver as relevant. > Changes for v2: > ---> Fixed race conditions in the driver as suggested by Jose Abreu > ---> Fixed unnecessray if else checks in the vdma_start_transfer > as suggested by Laurent Pinchart. > > .../devicetree/bindings/dma/xilinx/xilinx_dma.txt | 2 + > drivers/dma/xilinx/xilinx_dma.c | 78 +++++++++++++++------- > 2 files changed, 57 insertions(+), 23 deletions(-) > > diff --git a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt > index a2b8bfa..e951c09 100644 > --- a/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt > +++ b/Documentation/devicetree/bindings/dma/xilinx/xilinx_dma.txt > @@ -66,6 +66,8 @@ Optional child node properties: > Optional child node properties for VDMA: > - xlnx,genlock-mode: Tells Genlock synchronization is > enabled/disabled in hardware. > +- xlnx,fstore-enable: boolean; if defined, it indicates that controller > + supports frame store configuration. > Optional child node properties for AXI DMA: > -dma-channels: Number of dma channels in child node. > > diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c > index be7eb41..0e9c02e 100644 > --- a/drivers/dma/xilinx/xilinx_dma.c > +++ b/drivers/dma/xilinx/xilinx_dma.c > @@ -322,6 +322,7 @@ struct xilinx_dma_tx_descriptor { > * @genlock: Support genlock mode > * @err: Channel has errors > * @idle: Check for channel idle > + * @has_fstoreen: Check for frame store configuration > * @tasklet: Cleanup work after irq > * @config: Device configuration info > * @flush_on_fsync: Flush on Frame sync > @@ -353,6 +354,7 @@ struct xilinx_dma_chan { > bool genlock; > bool err; > bool idle; > + bool has_fstoreen; > struct tasklet_struct tasklet; > struct xilinx_vdma_config config; > bool flush_on_fsync; > @@ -990,6 +992,27 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan) > if (list_empty(&chan->pending_list)) > return; > > + /* > + * Note: When VDMA is built with default h/w configuration > + * User should submit frames upto H/W configured. > + * If users submits less than h/w configured > + * VDMA engine tries to write to a invalid location > + * Results undefined behaviour/memory corruption. > + * > + * If user would like to submit frames less than h/w capable > + * On S2MM side please enable debug info 13 at the h/w level > + * On MM2S side please enable debug info 6 at the h/w level > + * It will allows the frame buffers numbers to be modified at runtime. > + */ > + if (!chan->has_fstoreen && > + chan->desc_pendingcount < chan->num_frms) { > + dev_warn(chan->dev, "Frame Store Configuration is not enabled at the\n"); > + dev_warn(chan->dev, "H/w level enable Debug info 13 or 6 at the h/w level\n"); > + dev_warn(chan->dev, "OR Submit the frames upto h/w Capable\n\r"); > + > + return; > + } > + > desc = list_first_entry(&chan->pending_list, > struct xilinx_dma_tx_descriptor, node); > tail_desc = list_last_entry(&chan->pending_list, > @@ -1052,25 +1075,38 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan) > if (chan->has_sg) { > dma_ctrl_write(chan, XILINX_DMA_REG_TAILDESC, > tail_segment->phys); > + list_splice_tail_init(&chan->pending_list, &chan->active_list); > + chan->desc_pendingcount = 0; > } else { > struct xilinx_vdma_tx_segment *segment, *last = NULL; > - int i = 0; > + int i = 0, j = 0; > > if (chan->desc_submitcount < chan->num_frms) > i = chan->desc_submitcount; > > - list_for_each_entry(segment, &desc->segments, node) { > - if (chan->ext_addr) > - vdma_desc_write_64(chan, > - XILINX_VDMA_REG_START_ADDRESS_64(i++), > - segment->hw.buf_addr, > - segment->hw.buf_addr_msb); > - else > - vdma_desc_write(chan, > - XILINX_VDMA_REG_START_ADDRESS(i++), > - segment->hw.buf_addr); > - > - last = segment; > + for (j = 0; j < chan->num_frms; ) { > + list_for_each_entry(segment, &desc->segments, node) { > + if (chan->ext_addr) > + vdma_desc_write_64(chan, > + XILINX_VDMA_REG_START_ADDRESS_64(i++), > + segment->hw.buf_addr, > + segment->hw.buf_addr_msb); > + else > + vdma_desc_write(chan, > + XILINX_VDMA_REG_START_ADDRESS(i++), > + segment->hw.buf_addr); > + > + last = segment; > + } > + list_del(&desc->node); > + list_add_tail(&desc->node, &chan->active_list); > + j++; > + if (list_empty(&chan->pending_list) || > + (i == chan->num_frms)) > + break; > + desc = list_first_entry(&chan->pending_list, > + struct xilinx_dma_tx_descriptor, > + node); > } > > if (!last) > @@ -1081,20 +1117,14 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan) > vdma_desc_write(chan, XILINX_DMA_REG_FRMDLY_STRIDE, > last->hw.stride); > vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize); > - } > > - chan->idle = false; > - if (!chan->has_sg) { > - list_del(&desc->node); > - list_add_tail(&desc->node, &chan->active_list); > - chan->desc_submitcount++; > - chan->desc_pendingcount--; > + chan->desc_submitcount += j; > + chan->desc_pendingcount -= j; > if (chan->desc_submitcount == chan->num_frms) > chan->desc_submitcount = 0; > - } else { > - list_splice_tail_init(&chan->pending_list, &chan->active_list); > - chan->desc_pendingcount = 0; > } > + > + chan->idle = false; > } > > /** > @@ -1342,6 +1372,7 @@ static int xilinx_dma_reset(struct xilinx_dma_chan *chan) > > chan->err = false; > chan->idle = true; > + chan->desc_submitcount = 0; > > return err; > } > @@ -2315,6 +2346,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev, > has_dre = of_property_read_bool(node, "xlnx,include-dre"); > > chan->genlock = of_property_read_bool(node, "xlnx,genlock-mode"); > + chan->has_fstoreen = of_property_read_bool(node, "xlnx,fstore-enable"); > > err = of_property_read_u32(node, "xlnx,datawidth", &value); > if (err) { > -- > 2.1.2 > -- ~Vinod -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html