On Sat, Jan 07, 2017 at 12:15:28PM +0530, Kedareswara rao Appana wrote:
> Add channel idle state to ensure that dma descriptor is not
> submitted when VDMA engine is in progress.
any reason why you want to make your own varible and not use the HW to query
as done earlier. It is not clear to me why that is removed from description
>
> Reviewed-by: Jose Abreu <joabreu@xxxxxxxxxxxx>
> Signed-off-by: Kedareswara rao Appana <appanad@xxxxxxxxxx>
> ---
> Changes for v5:
> ---> None.
> Changes for v4:
> ---> None.
> Changes for v3:
> ---> None.
> Changes for v2:
> ---> Add idle check in the reset as suggested by Jose Abreu
> ---> Removed xilinx_dma_is_running/xilinx_dma_is_idle checks
> in the driver and used common idle checks across the driver
> as suggested by Laurent Pinchart.
>
> drivers/dma/xilinx/xilinx_dma.c | 56 +++++++++++++----------------------------
> 1 file changed, 17 insertions(+), 39 deletions(-)
>
> diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
> index 8288fe4..be7eb41 100644
> --- a/drivers/dma/xilinx/xilinx_dma.c
> +++ b/drivers/dma/xilinx/xilinx_dma.c
> @@ -321,6 +321,7 @@ struct xilinx_dma_tx_descriptor {
> * @cyclic: Check for cyclic transfers.
> * @genlock: Support genlock mode
> * @err: Channel has errors
> + * @idle: Check for channel idle
> * @tasklet: Cleanup work after irq
> * @config: Device configuration info
> * @flush_on_fsync: Flush on Frame sync
> @@ -351,6 +352,7 @@ struct xilinx_dma_chan {
> bool cyclic;
> bool genlock;
> bool err;
> + bool idle;
> struct tasklet_struct tasklet;
> struct xilinx_vdma_config config;
> bool flush_on_fsync;
> @@ -920,32 +922,6 @@ static enum dma_status xilinx_dma_tx_status(struct dma_chan *dchan,
> }
>
> /**
> - * xilinx_dma_is_running - Check if DMA channel is running
> - * @chan: Driver specific DMA channel
> - *
> - * Return: '1' if running, '0' if not.
> - */
> -static bool xilinx_dma_is_running(struct xilinx_dma_chan *chan)
> -{
> - return !(dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
> - XILINX_DMA_DMASR_HALTED) &&
> - (dma_ctrl_read(chan, XILINX_DMA_REG_DMACR) &
> - XILINX_DMA_DMACR_RUNSTOP);
> -}
> -
> -/**
> - * xilinx_dma_is_idle - Check if DMA channel is idle
> - * @chan: Driver specific DMA channel
> - *
> - * Return: '1' if idle, '0' if not.
> - */
> -static bool xilinx_dma_is_idle(struct xilinx_dma_chan *chan)
> -{
> - return dma_ctrl_read(chan, XILINX_DMA_REG_DMASR) &
> - XILINX_DMA_DMASR_IDLE;
> -}
> -
> -/**
> * xilinx_dma_halt - Halt DMA channel
> * @chan: Driver specific DMA channel
> */
> @@ -966,6 +942,7 @@ static void xilinx_dma_halt(struct xilinx_dma_chan *chan)
> chan, dma_ctrl_read(chan, XILINX_DMA_REG_DMASR));
> chan->err = true;
> }
> + chan->idle = true;
> }
>
> /**
> @@ -1007,6 +984,9 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
> if (chan->err)
> return;
>
> + if (!chan->idle)
> + return;
> +
> if (list_empty(&chan->pending_list))
> return;
>
> @@ -1018,13 +998,6 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
> tail_segment = list_last_entry(&tail_desc->segments,
> struct xilinx_vdma_tx_segment, node);
>
> - /* If it is SG mode and hardware is busy, cannot submit */
> - if (chan->has_sg && xilinx_dma_is_running(chan) &&
> - !xilinx_dma_is_idle(chan)) {
> - dev_dbg(chan->dev, "DMA controller still busy\n");
> - return;
> - }
> -
> /*
> * If hardware is idle, then all descriptors on the running lists are
> * done, start new transfers
> @@ -1110,6 +1083,7 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
> vdma_desc_write(chan, XILINX_DMA_REG_VSIZE, last->hw.vsize);
> }
>
> + chan->idle = false;
> if (!chan->has_sg) {
> list_del(&desc->node);
> list_add_tail(&desc->node, &chan->active_list);
> @@ -1136,6 +1110,9 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
> if (chan->err)
> return;
>
> + if (!chan->idle)
> + return;
> +
> if (list_empty(&chan->pending_list))
> return;
>
> @@ -1181,6 +1158,7 @@ static void xilinx_cdma_start_transfer(struct xilinx_dma_chan *chan)
>
> list_splice_tail_init(&chan->pending_list, &chan->active_list);
> chan->desc_pendingcount = 0;
> + chan->idle = false;
> }
>
> /**
> @@ -1196,15 +1174,11 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
> if (chan->err)
> return;
>
> - if (list_empty(&chan->pending_list))
> + if (!chan->idle)
> return;
>
> - /* If it is SG mode and hardware is busy, cannot submit */
> - if (chan->has_sg && xilinx_dma_is_running(chan) &&
> - !xilinx_dma_is_idle(chan)) {
> - dev_dbg(chan->dev, "DMA controller still busy\n");
> + if (list_empty(&chan->pending_list))
> return;
> - }
>
> head_desc = list_first_entry(&chan->pending_list,
> struct xilinx_dma_tx_descriptor, node);
> @@ -1302,6 +1276,7 @@ static void xilinx_dma_start_transfer(struct xilinx_dma_chan *chan)
>
> list_splice_tail_init(&chan->pending_list, &chan->active_list);
> chan->desc_pendingcount = 0;
> + chan->idle = false;
> }
>
> /**
> @@ -1366,6 +1341,7 @@ static int xilinx_dma_reset(struct xilinx_dma_chan *chan)
> }
>
> chan->err = false;
> + chan->idle = true;
>
> return err;
> }
> @@ -1447,6 +1423,7 @@ static irqreturn_t xilinx_dma_irq_handler(int irq, void *data)
> if (status & XILINX_DMA_DMASR_FRM_CNT_IRQ) {
> spin_lock(&chan->lock);
> xilinx_dma_complete_descriptor(chan);
> + chan->idle = true;
> chan->start_transfer(chan);
> spin_unlock(&chan->lock);
> }
> @@ -2327,6 +2304,7 @@ static int xilinx_dma_chan_probe(struct xilinx_dma_device *xdev,
> chan->has_sg = xdev->has_sg;
> chan->desc_pendingcount = 0x0;
> chan->ext_addr = xdev->ext_addr;
> + chan->idle = true;
>
> spin_lock_init(&chan->lock);
> INIT_LIST_HEAD(&chan->pending_list);
> --
> 2.1.2
>
--
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
