Hi Andrzej,
Tested-by: Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx>
Hoegeun
On 01/09/2017 07:40 PM, Andrzej Hajda wrote:
TV path consist of following interconnected components:
- DECON_TV - display controller,
- HDMI - video signal converter RGB / HDMI,
- MHL - video signal converter HDMI / MHL,
- DDC - i2c slave device for EDID reading (on hsi2c_11 bus).
Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
---
v2:
- replaced magic numbers with macros,
- removed assigned-clock properties from sii8620 -
PMU clock is already confgured in PMU node
---
.../boot/dts/exynos/exynos5433-tm2-common.dtsi | 69 ++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 669bb1f..ca90e6a 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -281,6 +281,22 @@
};
};
+&decon_tv {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ tv_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_tv>;
+ };
+ };
+ };
+};
+
&dsi {
status = "okay";
vddcore-supply = <&ldo6_reg>;
@@ -304,6 +320,33 @@
};
};
+&hdmi {
+ hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ vdd-supply = <&ldo6_reg>;
+ vdd_osc-supply = <&ldo7_reg>;
+ vdd_pll-supply = <&ldo6_reg>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ hdmi_to_tv: endpoint {
+ remote-endpoint = <&tv_to_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ hdmi_to_mhl: endpoint {
+ remote-endpoint = <&mhl_to_hdmi>;
+ };
+ };
+ };
+};
+
&hsi2c_0 {
status = "okay";
clock-frequency = <2500000>;
@@ -692,6 +735,28 @@
};
};
+&hsi2c_7 {
+ status = "okay";
+
+ sii8620@39 {
+ reg = <0x39>;
+ compatible = "sil,sii8620";
+ cvcc10-supply = <&ldo36_reg>;
+ iovcc18-supply = <&ldo34_reg>;
+ interrupt-parent = <&gpf0>;
+ interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+ reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+ clocks = <&pmu_system_controller 0>;
+ clock-names = "xtal";
+
+ port {
+ mhl_to_hdmi: endpoint {
+ remote-endpoint = <&hdmi_to_mhl>;
+ };
+ };
+ };
+};
+
&hsi2c_8 {
status = "okay";
@@ -735,6 +800,10 @@
};
};
+&hsi2c_11 {
+ status = "okay";
+};
+
&i2s0 {
status = "okay";
};
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html