Hi Santosh, This patch adds the reset controller nodes and the corresponding reset data for TI Keystone 66AK2H, 66AK2L and 66AK2E SoCs. These resets are for the DSPs on these SoCs, and are the last dependencies before the keystone remoteproc driver can be added. All these SoCs will use the ti-syscon-reset driver which is already part of mainline kernel. The bindings for the same can be found in Documentation/devicetree/bindings/reset/ti-syscon-reset.txt file. Note that the other Keystone 66AK2G SoC will use a different TI-SCI based reset driver, so will be submitted separately once the TI-SCI dependencies make it into mainline. Patches are based on top of 4.10-rc1 plus the MSM-RAM DT node series that you have already picked up. Patch 1 enable the Reset Framework for Keystone platforms, and remaining patches add the required DT nodes. regards Suman Suman Anna (5): ARM: Keystone: Enable ARCH_HAS_RESET_CONTROLLER ARM: dts: keystone: Add PSC node ARM: dts: keystone-k2hk: Add PSC reset controller node ARM: dts: keystone-k2l: Add PSC reset controller node ARM: dts: keystone-k2e: Add PSC reset controller node arch/arm/boot/dts/keystone-k2e.dtsi | 13 +++++++++++++ arch/arm/boot/dts/keystone-k2hk.dtsi | 20 ++++++++++++++++++++ arch/arm/boot/dts/keystone-k2l.dtsi | 16 ++++++++++++++++ arch/arm/boot/dts/keystone.dtsi | 5 +++++ arch/arm/mach-keystone/Kconfig | 1 + 5 files changed, 55 insertions(+) -- 2.10.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
