On 09.01.2017 10:19, Inki Dae wrote:
>
> 2017년 01월 09일 16:37에 Andrzej Hajda 이(가) 쓴 글:
>> On 06.01.2017 09:36, Inki Dae wrote:
>>> 2017년 01월 06일 17:18에 Andi Shyti 이(가) 쓴 글:
>>>> Hi Inki,
>>>>
>>>> Thanks for the reply, but...
>>>>
>>>>>>> +static const struct drm_display_mode default_mode = {
>>>>>>> + .clock = 222372,
>>>>>>> + .hdisplay = 1440,
>>>>>>> + .hsync_start = 1440 + 1,
>>>>>>> + .hsync_end = 1440 + 1 + 1,
>>>>>>> + .htotal = 1440 + 1 + 1 + 1,
>>>>>>> + .vdisplay = 2560,
>>>>>>> + .vsync_start = 2560 + 1,
>>>>>>> + .vsync_end = 2560 + 1 + 1,
>>>>>>> + .vtotal = 2560 + 1 + 1 + 15,
>>>>>>> + .vrefresh = 60,
>>>>>>> + .flags = 0,
>>>>>>> +};
>>>>>> how is this working with tm2e? Are these values valid for both
>>>>>> the boards?
>>>>> We don't need to consider tm2e board with two reasones,
>>>>> 1. there is no tm2e board support in mainline
>>>>> 2. the panel on tm2 would be a little bit different from one on tm2e
>>>> ... this display in the Tizen Kernel is supported by both:
>>>> tm2 [1] and tm2e [2]. The only differences are:
>>> Why tm2e dts file is in mainline? Seems communication miss with Chanwoo. :(
>>>
>>>> TM2:
>>>> clock-frequency = <14874444>;
>>>> hactive = <1440>;
>>>>
>>>> TM2E:
>>>> clock-frequency = <16523724>;
>>>> hactive = <1600>;
>>>>
>>>> I don't know much about the differences you mention in point 2,
>>>> but it's a pity to drop support only because we don't want to put
>>>> in the dts the 'hactive', and 'clock-frequency' properties.
>>> Anyway, tm2e board is already in mainline so Panel driver may need to identify what kinds of panel is probed to decide porch values. I think there are relevant registers in MCU of the Panel device to check version or similar thing.
>> I think we can safely use different compatible string for tm2e - it uses
>> different display IC controller - s6e3hf2, driver will provide timings
>> based on it.
> Using compatable string wouldn't be a good idea because Panel is a device not specific to board.
But both panels are different devices:
TM2 has: AMS567DJ01 panel on S6E3HA2 interface (called LDI/IC)
TM2E has AMB559DE01 panel on S6E3HF2 interface (called LDI/IC)
Why assigning different compatibles to different devices is not a good idea?
>
>> As far as I examined available specs/docs there is no reliable register
>> which can be used to safely distinguish it on runtime, but the docs I
>> have are far from completeness.
> The data sheet I am seeing says a RDDIDS register describes manufacturer and module version information. With this we could identify the Panel device.
> Of course, we may need to check the register has really different values according to board.
>
> Below is the version information Hoegeun checked,
>
> TM2
> [ 4.908666] panel_s6e3ha2 13900000.dsi.0: Manufacture date: 2014-10-31 06:41
> [ 5.035768] panel_s6e3ha2 13900000.dsi.0: Id: 50 20 09
>
> TM2e
> [ 4.929265] panel_s6e3ha2 13900000.dsi.0: Manufacture date: 2014-09-03 06:30
> [ 5.056287] panel_s6e3ha2 13900000.dsi.0: Id: 40 40 14
There is description of ID1, ID2, ID3 registers in specs of both panels,
I see no reliable bits to distinguish panels.
And relying on read values of random devices does not seems to me proper
solution.
Regards
Andrzej
>
>
> Thanks.
>
>> Regards
>> Andrzej
>>
>>> Thanks.
>>>
>>>> Andi
>>>>
>>>> [1] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts?h=tizen#n1284
>>>> [2] https://git.tizen.org/cgit/platform/kernel/linux-exynos/tree/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts?h=tizen#n1270
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>>>
>>>> .
>>>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
