This patch adds the device tree support for FSL LS2088A SoC based on ARMv8 architecture. Following levels of DTSI/DTS files have been created for the LS2088A SoC family: - fsl-ls2088a.dtsi: DTS-Include file for FSL LS2088A SoC. - fsl-ls2088a-qds.dts: DTS file for FSL LS2088A QDS board. - fsl-ls2088a-rdb.dts: DTS file for FSL LS2088A RDB board. Signed-off-by: Priyanka Jain <priyanka.jain@xxxxxxx> Signed-off-by: Ashish Kumar <ashish.kumar@xxxxxxx> Signed-off-by: Abhimanyu Saini <abhimanyu.saini@xxxxxxx> --- Changes for v2: - reorganize LS2088A device tree to use common nodes from LS2080A device trees. arch/arm64/boot/dts/freescale/Makefile | 2 + arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 65 +++++++++ arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 65 +++++++++ arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 162 ++++++++++++++++++++++ 4 files changed, 294 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 6602718..854868e 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -5,6 +5,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts new file mode 100644 index 0000000..74bcb5d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts @@ -0,0 +1,65 @@ +/* + * Device Tree file for Freescale LS2088A QDS Board. + * + * Copyright (C) 2015-17, Freescale Semiconductor + * + * Abhimanyu Saini <abhimanyu.saini@xxxxxxx> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls2088a.dtsi" + +/ { + model = "Freescale Layerscape 2088A QDS Board"; + compatible = "fsl,ls2088a-qds", "fsl,ls2088a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +#include "fsl-ls208xa-qds.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts new file mode 100644 index 0000000..801eadd --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -0,0 +1,65 @@ +/* + * Device Tree file for Freescale LS2080a RDB Board. + * + * Copyright (C) 2015-17, Freescale Semiconductor + * + * Abhimanyu Saini <abhimanyu.saini@xxxxxxx> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls2088a.dtsi" + +/ { + model = "Freescale Layerscape 2088A RDB Board"; + compatible = "fsl,ls2088a-rdb", "fsl,ls2088a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; + +#include "fsl-ls208xa-rdb.dtsi" diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi new file mode 100644 index 0000000..f3e22d2 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -0,0 +1,162 @@ +/* + * Device Tree Include file for Freescale Layerscape-2088A family SoC. + * + * Copyright (C) 2015-17, Freescale Semiconductor + * + * Abhimanyu Saini <abhimanyu.saini@xxxxxxx> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + compatible = "fsl,ls2080a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; + }; + + cpu4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x200>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; + }; + + cpu5: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x201>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; + }; + + cpu6: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x300>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; + }; + + cpu7: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x301>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + }; + + cluster2_l2: l2-cache2 { + compatible = "cache"; + }; + + cluster3_l2: l2-cache3 { + compatible = "cache"; + }; + }; + #include "fsl-ls208xa.dtsi" +}; + +&pcie1 { + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; +}; + +&pcie2 { + ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; +}; + +&pcie3 { + ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; +}; + +&pcie4 { + ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>; +}; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html