Re: [PATCH v7 6/8] IIO: add STM32 timer trigger driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 05/01/17 09:25, Benjamin Gaignard wrote:
> Timers IPs can be used to generate triggers for other IPs like
> DAC or ADC.
> Each trigger may result of timer internals signals like counter enable,
> reset or edge, this configuration could be done through "master_mode"
> device attribute.
> 
> Since triggers could be used by DAC or ADC their names are defined
> in include/ nux/iio/timer/stm32-timer-trigger.h and is_stm32_iio_timer_trigger
> function could be used to check if the trigger is valid or not.
> 
> "trgo" trigger have a "sampling_frequency" attribute which allow to configure
> timer sampling frequency.
> 
> version 7:
> - remove all iio_device related code
> - move driver into trigger directory
> 
> version 5:
> - simplify tables of triggers
> - only create an IIO device when needed
> 
> version 4:
> - get triggers configuration from "reg" in DT
> - add tables of triggers
> - sampling frequency is enable/disable when writing in trigger
>   sampling_frequency attribute
> - no more use of interruptions
> 
> version 3:
> - change compatible to "st,stm32-timer-trigger"
> - fix attributes access right
> - use string instead of int for master_mode and slave_mode
> - document device attributes in sysfs-bus-iio-timer-stm32
> 
> version 2:
> - keep only one compatible
> - use st,input-triggers-names and st,output-triggers-names
>   to know which triggers are accepted and/or create by the device
> 
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
One line snuck in that shouldn't be there (the one in iio/Kconfig).
Other than that

Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>

I didn't get a chance to look at doing trigger trees unfortunately.
Not sure when I'll next get a window to work on new stuff.

Thanks,

Jonathan

> ---
>  .../ABI/testing/sysfs-bus-iio-timer-stm32          |  29 ++
>  drivers/iio/Kconfig                                |   1 -
>  drivers/iio/trigger/Kconfig                        |  10 +
>  drivers/iio/trigger/Makefile                       |   1 +
>  drivers/iio/trigger/stm32-timer-trigger.c          | 340 +++++++++++++++++++++
>  include/linux/iio/timer/stm32-timer-trigger.h      |  62 ++++
>  6 files changed, 442 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
>  create mode 100644 drivers/iio/trigger/stm32-timer-trigger.c
>  create mode 100644 include/linux/iio/timer/stm32-timer-trigger.h
> 
> diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
> new file mode 100644
> index 0000000..a7f5177
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
> @@ -0,0 +1,29 @@
> +What:		/sys/bus/iio/devices/triggerX/master_mode_available
> +KernelVersion:	4.10
> +Contact:	benjamin.gaignard@xxxxxx
> +Description:
> +		Reading returns the list possible master modes which are:
> +		- "reset"     :	The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
> +		- "enable"    : The Counter Enable signal CNT_EN is used as trigger output.
> +		- "update"    : The update event is selected as trigger output.
> +				For instance a master timer can then be used as a prescaler for a slave timer.
> +		- "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
> +		- "OC1REF"    : OC1REF signal is used as trigger output.
> +		- "OC2REF"    : OC2REF signal is used as trigger output.
> +		- "OC3REF"    : OC3REF signal is used as trigger output.
> +		- "OC4REF"    : OC4REF signal is used as trigger output.
> +
> +What:		/sys/bus/iio/devices/triggerX/master_mode
> +KernelVersion:	4.10
> +Contact:	benjamin.gaignard@xxxxxx
> +Description:
> +		Reading returns the current master modes.
> +		Writing set the master mode
> +
> +What:		/sys/bus/iio/devices/triggerX/sampling_frequency
> +KernelVersion:	4.10
> +Contact:	benjamin.gaignard@xxxxxx
> +Description:
> +		Reading returns the current sampling frequency.
> +		Writing an value different of 0 set and start sampling.
> +		Writing 0 stop sampling.
> diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
> index a918270..6b0c427 100644
> --- a/drivers/iio/Kconfig
> +++ b/drivers/iio/Kconfig
> @@ -92,5 +92,4 @@ source "drivers/iio/potentiostat/Kconfig"
>  source "drivers/iio/pressure/Kconfig"
>  source "drivers/iio/proximity/Kconfig"
>  source "drivers/iio/temperature/Kconfig"
> -
Please fix this!!
>  endif # IIO
> diff --git a/drivers/iio/trigger/Kconfig b/drivers/iio/trigger/Kconfig
> index 809b2e7..72d3a32 100644
> --- a/drivers/iio/trigger/Kconfig
> +++ b/drivers/iio/trigger/Kconfig
> @@ -24,6 +24,16 @@ config IIO_INTERRUPT_TRIGGER
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called iio-trig-interrupt.
>  
> +config IIO_STM32_TIMER_TRIGGER
> +	tristate "STM32 Timer Trigger"
> +	depends on (ARCH_STM32 && OF && MFD_STM32_TIMERS) || COMPILE_TEST
> +	help
> +	  Select this option to enable STM32 Timer Trigger
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called stm32-timer-trigger.
> +
> +
>  config IIO_TIGHTLOOP_TRIGGER
>  	tristate "A kthread based hammering loop trigger"
>  	depends on IIO_SW_TRIGGER
> diff --git a/drivers/iio/trigger/Makefile b/drivers/iio/trigger/Makefile
> index aab4dc2..5c4ecd3 100644
> --- a/drivers/iio/trigger/Makefile
> +++ b/drivers/iio/trigger/Makefile
> @@ -6,5 +6,6 @@
>  
>  obj-$(CONFIG_IIO_HRTIMER_TRIGGER) += iio-trig-hrtimer.o
>  obj-$(CONFIG_IIO_INTERRUPT_TRIGGER) += iio-trig-interrupt.o
> +obj-$(CONFIG_IIO_STM32_TIMER_TRIGGER) += stm32-timer-trigger.o
>  obj-$(CONFIG_IIO_SYSFS_TRIGGER) += iio-trig-sysfs.o
>  obj-$(CONFIG_IIO_TIGHTLOOP_TRIGGER) += iio-trig-loop.o
> diff --git a/drivers/iio/trigger/stm32-timer-trigger.c b/drivers/iio/trigger/stm32-timer-trigger.c
> new file mode 100644
> index 0000000..409fb0c
> --- /dev/null
> +++ b/drivers/iio/trigger/stm32-timer-trigger.c
> @@ -0,0 +1,340 @@
> +/*
> + * Copyright (C) STMicroelectronics 2016
> + *
> + * Author: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> + *
> + * License terms:  GNU General Public License (GPL), version 2
> + */
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +#include <linux/iio/timer/stm32-timer-trigger.h>
> +#include <linux/iio/trigger.h>
> +#include <linux/mfd/stm32-timers.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +
> +#define MAX_TRIGGERS 6
> +
> +/* List the triggers created by each timer */
> +static const void *triggers_table[][MAX_TRIGGERS] = {
> +	{ TIM1_TRGO, TIM1_CH1, TIM1_CH2, TIM1_CH3, TIM1_CH4,},
> +	{ TIM2_TRGO, TIM2_CH1, TIM2_CH2, TIM2_CH3, TIM2_CH4,},
> +	{ TIM3_TRGO, TIM3_CH1, TIM3_CH2, TIM3_CH3, TIM3_CH4,},
> +	{ TIM4_TRGO, TIM4_CH1, TIM4_CH2, TIM4_CH3, TIM4_CH4,},
> +	{ TIM5_TRGO, TIM5_CH1, TIM5_CH2, TIM5_CH3, TIM5_CH4,},
> +	{ TIM6_TRGO,},
> +	{ TIM7_TRGO,},
> +	{ TIM8_TRGO, TIM8_CH1, TIM8_CH2, TIM8_CH3, TIM8_CH4,},
> +	{ TIM9_TRGO, TIM9_CH1, TIM9_CH2,},
> +	{ TIM12_TRGO, TIM12_CH1, TIM12_CH2,},
> +};
> +
> +struct stm32_timer_trigger {
> +	struct device *dev;
> +	struct regmap *regmap;
> +	struct clk *clk;
> +	u32 max_arr;
> +	const void *triggers;
> +};
> +
> +static int stm32_timer_start(struct stm32_timer_trigger *priv,
> +			     unsigned int frequency)
> +{
> +	unsigned long long prd, div;
> +	int prescaler = 0;
> +	u32 ccer, cr1;
> +
> +	/* Period and prescaler values depends of clock rate */
> +	div = (unsigned long long)clk_get_rate(priv->clk);
> +
> +	do_div(div, frequency);
> +
> +	prd = div;
> +
> +	/*
> +	 * Increase prescaler value until we get a result that fit
> +	 * with auto reload register maximum value.
> +	 */
> +	while (div > priv->max_arr) {
> +		prescaler++;
> +		div = prd;
> +		do_div(div, (prescaler + 1));
> +	}
> +	prd = div;
> +
> +	if (prescaler > MAX_TIM_PSC) {
> +		dev_err(priv->dev, "prescaler exceeds the maximum value\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Check if nobody else use the timer */
> +	regmap_read(priv->regmap, TIM_CCER, &ccer);
> +	if (ccer & TIM_CCER_CCXE)
> +		return -EBUSY;
> +
> +	regmap_read(priv->regmap, TIM_CR1, &cr1);
> +	if (!(cr1 & TIM_CR1_CEN))
> +		clk_enable(priv->clk);
> +
> +	regmap_write(priv->regmap, TIM_PSC, prescaler);
> +	regmap_write(priv->regmap, TIM_ARR, prd - 1);
> +	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE);
> +
> +	/* Force master mode to update mode */
> +	regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0x20);
> +
> +	/* Make sure that registers are updated */
> +	regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
> +
> +	/* Enable controller */
> +	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN);
> +
> +	return 0;
> +}
> +
> +static void stm32_timer_stop(struct stm32_timer_trigger *priv)
> +{
> +	u32 ccer, cr1;
> +
> +	regmap_read(priv->regmap, TIM_CCER, &ccer);
> +	if (ccer & TIM_CCER_CCXE)
> +		return;
> +
> +	regmap_read(priv->regmap, TIM_CR1, &cr1);
> +	if (cr1 & TIM_CR1_CEN)
> +		clk_disable(priv->clk);
> +
> +	/* Stop timer */
> +	regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
> +	regmap_write(priv->regmap, TIM_PSC, 0);
> +	regmap_write(priv->regmap, TIM_ARR, 0);
> +
> +	/* Make sure that registers are updated */
> +	regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
> +}
> +
> +static ssize_t stm32_tt_store_frequency(struct device *dev,
> +					struct device_attribute *attr,
> +					const char *buf, size_t len)
> +{
> +	struct iio_trigger *trig = to_iio_trigger(dev);
> +	struct stm32_timer_trigger *priv = iio_trigger_get_drvdata(trig);
> +	unsigned int freq;
> +	int ret;
> +
> +	ret = kstrtouint(buf, 10, &freq);
> +	if (ret)
> +		return ret;
> +
> +	if (freq == 0) {
> +		stm32_timer_stop(priv);
> +	} else {
> +		ret = stm32_timer_start(priv, freq);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return len;
> +}
> +
> +static ssize_t stm32_tt_read_frequency(struct device *dev,
> +				       struct device_attribute *attr, char *buf)
> +{
> +	struct iio_trigger *trig = to_iio_trigger(dev);
> +	struct stm32_timer_trigger *priv = iio_trigger_get_drvdata(trig);
> +	u32 psc, arr, cr1;
> +	unsigned long long freq = 0;
> +
> +	regmap_read(priv->regmap, TIM_CR1, &cr1);
> +	regmap_read(priv->regmap, TIM_PSC, &psc);
> +	regmap_read(priv->regmap, TIM_ARR, &arr);
> +
> +	if (psc && arr && (cr1 & TIM_CR1_CEN)) {
> +		freq = (unsigned long long)clk_get_rate(priv->clk);
> +		do_div(freq, psc);
> +		do_div(freq, arr);
> +	}
> +
> +	return sprintf(buf, "%d\n", (unsigned int)freq);
> +}
> +
> +static IIO_DEV_ATTR_SAMP_FREQ(0660,
> +			      stm32_tt_read_frequency,
> +			      stm32_tt_store_frequency);
> +
> +static char *master_mode_table[] = {
> +	"reset",
> +	"enable",
> +	"update",
> +	"compare_pulse",
> +	"OC1REF",
> +	"OC2REF",
> +	"OC3REF",
> +	"OC4REF"
> +};
> +
> +static ssize_t stm32_tt_show_master_mode(struct device *dev,
> +					 struct device_attribute *attr,
> +					 char *buf)
> +{
> +	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> +	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> +	u32 cr2;
> +
> +	regmap_read(priv->regmap, TIM_CR2, &cr2);
> +	cr2 = (cr2 & TIM_CR2_MMS) >> TIM_CR2_MMS_SHIFT;
> +
> +	return snprintf(buf, PAGE_SIZE, "%s\n", master_mode_table[cr2]);
> +}
> +
> +static ssize_t stm32_tt_store_master_mode(struct device *dev,
> +					  struct device_attribute *attr,
> +					  const char *buf, size_t len)
> +{
> +	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
> +	struct stm32_timer_trigger *priv = iio_priv(indio_dev);
> +	int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(master_mode_table); i++) {
> +		if (!strncmp(master_mode_table[i], buf,
> +			     strlen(master_mode_table[i]))) {
> +			regmap_update_bits(priv->regmap, TIM_CR2,
> +					   TIM_CR2_MMS, i << TIM_CR2_MMS_SHIFT);
> +			/* Make sure that registers are updated */
> +			regmap_update_bits(priv->regmap, TIM_EGR,
> +					   TIM_EGR_UG, TIM_EGR_UG);
> +			return len;
> +		}
> +	}
> +
> +	return -EINVAL;
> +}
> +
> +static IIO_CONST_ATTR(master_mode_available,
> +	"reset enable update compare_pulse OC1REF OC2REF OC3REF OC4REF");
> +
> +static IIO_DEVICE_ATTR(master_mode, 0660,
> +		       stm32_tt_show_master_mode,
> +		       stm32_tt_store_master_mode,
> +		       0);
> +
> +static struct attribute *stm32_trigger_attrs[] = {
> +	&iio_dev_attr_sampling_frequency.dev_attr.attr,
> +	&iio_dev_attr_master_mode.dev_attr.attr,
> +	&iio_const_attr_master_mode_available.dev_attr.attr,
> +	NULL,
> +};
> +
> +static const struct attribute_group stm32_trigger_attr_group = {
> +	.attrs = stm32_trigger_attrs,
> +};
> +
> +static const struct attribute_group *stm32_trigger_attr_groups[] = {
> +	&stm32_trigger_attr_group,
> +	NULL,
> +};
> +
> +static const struct iio_trigger_ops timer_trigger_ops = {
> +	.owner = THIS_MODULE,
> +};
> +
> +static int stm32_setup_iio_triggers(struct stm32_timer_trigger *priv)
> +{
> +	int ret;
> +	const char * const *cur = priv->triggers;
> +
> +	while (cur && *cur) {
> +		struct iio_trigger *trig;
> +
> +		trig = devm_iio_trigger_alloc(priv->dev, "%s", *cur);
> +		if  (!trig)
> +			return -ENOMEM;
> +
> +		trig->dev.parent = priv->dev->parent;
> +		trig->ops = &timer_trigger_ops;
> +
> +		/*
> +		 * sampling frequency and master mode attributes
> +		 * should only be available on trgo trigger which
> +		 * is always the first in the list.
> +		 */
> +		if (cur == priv->triggers)
> +			trig->dev.groups = stm32_trigger_attr_groups;
> +
> +		iio_trigger_set_drvdata(trig, priv);
> +
> +		ret = devm_iio_trigger_register(priv->dev, trig);
> +		if (ret)
> +			return ret;
> +		cur++;
> +	}
> +
> +	return 0;
> +}
> +
> +/**
> + * is_stm32_timer_trigger
> + * @trig: trigger to be checked
> + *
> + * return true if the trigger is a valid stm32 iio timer trigger
> + * either return false
> + */
> +bool is_stm32_timer_trigger(struct iio_trigger *trig)
> +{
> +	return (trig->ops == &timer_trigger_ops);
> +}
> +EXPORT_SYMBOL(is_stm32_timer_trigger);
> +
> +static int stm32_timer_trigger_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct stm32_timer_trigger *priv;
> +	struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent);
> +	unsigned int index;
> +	int ret;
> +
> +	if (of_property_read_u32(dev->of_node, "reg", &index))
> +		return -EINVAL;
> +
> +	if (index >= ARRAY_SIZE(triggers_table))
> +		return -EINVAL;
> +
> +	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> +
> +	if (!priv)
> +		return -ENOMEM;
> +
> +	priv->dev = dev;
> +	priv->regmap = ddata->regmap;
> +	priv->clk = ddata->clk;
> +	priv->max_arr = ddata->max_arr;
> +	priv->triggers = triggers_table[index];
> +
> +	ret = stm32_setup_iio_triggers(priv);
> +	if (ret)
> +		return ret;
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id stm32_trig_of_match[] = {
> +	{ .compatible = "st,stm32-timer-trigger", },
> +	{ /* end node */ },
> +};
> +MODULE_DEVICE_TABLE(of, stm32_trig_of_match);
> +
> +static struct platform_driver stm32_timer_trigger_driver = {
> +	.probe = stm32_timer_trigger_probe,
> +	.driver = {
> +		.name = "stm32-timer-trigger",
> +		.of_match_table = stm32_trig_of_match,
> +	},
> +};
> +module_platform_driver(stm32_timer_trigger_driver);
> +
> +MODULE_ALIAS("platform: stm32-timer-trigger");
> +MODULE_DESCRIPTION("STMicroelectronics STM32 Timer Trigger driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/include/linux/iio/timer/stm32-timer-trigger.h b/include/linux/iio/timer/stm32-timer-trigger.h
> new file mode 100644
> index 0000000..55535ae
> --- /dev/null
> +++ b/include/linux/iio/timer/stm32-timer-trigger.h
> @@ -0,0 +1,62 @@
> +/*
> + * Copyright (C) STMicroelectronics 2016
> + *
> + * Author: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> + *
> + * License terms:  GNU General Public License (GPL), version 2
> + */
> +
> +#ifndef _STM32_TIMER_TRIGGER_H_
> +#define _STM32_TIMER_TRIGGER_H_
> +
> +#define TIM1_TRGO	"tim1_trgo"
> +#define TIM1_CH1	"tim1_ch1"
> +#define TIM1_CH2	"tim1_ch2"
> +#define TIM1_CH3	"tim1_ch3"
> +#define TIM1_CH4	"tim1_ch4"
> +
> +#define TIM2_TRGO	"tim2_trgo"
> +#define TIM2_CH1	"tim2_ch1"
> +#define TIM2_CH2	"tim2_ch2"
> +#define TIM2_CH3	"tim2_ch3"
> +#define TIM2_CH4	"tim2_ch4"
> +
> +#define TIM3_TRGO	"tim3_trgo"
> +#define TIM3_CH1	"tim3_ch1"
> +#define TIM3_CH2	"tim3_ch2"
> +#define TIM3_CH3	"tim3_ch3"
> +#define TIM3_CH4	"tim3_ch4"
> +
> +#define TIM4_TRGO	"tim4_trgo"
> +#define TIM4_CH1	"tim4_ch1"
> +#define TIM4_CH2	"tim4_ch2"
> +#define TIM4_CH3	"tim4_ch3"
> +#define TIM4_CH4	"tim4_ch4"
> +
> +#define TIM5_TRGO	"tim5_trgo"
> +#define TIM5_CH1	"tim5_ch1"
> +#define TIM5_CH2	"tim5_ch2"
> +#define TIM5_CH3	"tim5_ch3"
> +#define TIM5_CH4	"tim5_ch4"
> +
> +#define TIM6_TRGO	"tim6_trgo"
> +
> +#define TIM7_TRGO	"tim7_trgo"
> +
> +#define TIM8_TRGO	"tim8_trgo"
> +#define TIM8_CH1	"tim8_ch1"
> +#define TIM8_CH2	"tim8_ch2"
> +#define TIM8_CH3	"tim8_ch3"
> +#define TIM8_CH4	"tim8_ch4"
> +
> +#define TIM9_TRGO	"tim9_trgo"
> +#define TIM9_CH1	"tim9_ch1"
> +#define TIM9_CH2	"tim9_ch2"
> +
> +#define TIM12_TRGO	"tim12_trgo"
> +#define TIM12_CH1	"tim12_ch1"
> +#define TIM12_CH2	"tim12_ch2"
> +
> +bool is_stm32_timer_trigger(struct iio_trigger *trig);
> +
> +#endif
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux