On 04/01/17 12:16, Peter Rosin wrote:
> Signed-off-by: Peter Rosin <peda@xxxxxxxxxx>
Looks neat and tidy to me.
Acked-by: Jonathan Cameron <jic23@xxxxxxxxxx>
> ---
> .../devicetree/bindings/mux/mux-controller.txt | 26 ++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mux/mux-controller.txt b/Documentation/devicetree/bindings/mux/mux-controller.txt
> index 42b2177e5ae1..4e89df8b2392 100644
> --- a/Documentation/devicetree/bindings/mux/mux-controller.txt
> +++ b/Documentation/devicetree/bindings/mux/mux-controller.txt
> @@ -125,3 +125,29 @@ An example mux controller might look like this:
> reg = <0x50>;
> #mux-control-cells = <1>;
> };
> +
> +
> +Combinded controller and consumer of a GPIO mux
> +-----------------------------------------------
> +
> +For the common case of a single consumer of a GPIO controlled mux, there is
> +a simplified binding which will instantiate an implicit mux controller. Just
> +specify a mux-gpios property with the same interpretation as in mux-gpio.txt.
> +Note that other properties described in mux-gpio.txt are not available in
> +this simplified form and that the mux controller is unnamed. If you need
> +more than one mux controller, a shared mux controller or if you need a
> +specific idle-state, use the more flexible binding with the mux controller
> +in its own node.
> +
> +Example:
> +
> + adc-mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc 0>;
> + io-channel-names = "parent";
> +
> + mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
> + <&pioA 1 GPIO_ACTIVE_HIGH>;
> +
> + channels = "sync-1", "in", "out", "sync-2";
> + };
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
