Remove pwm0grp since it is: a) Not referenced anywhere in the DTS file (unlike Tower board it is based on, this board does not use/expose FTM0) b) Configures PTB2 and PTB3 in a way that contradicts pinctrl-mdio-mux Cc: Shawn Guo <shawnguo@xxxxxxxxxx> Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> Cc: Russell King <linux@xxxxxxxxxxxxxxx> Cc: Sascha Hauer <kernel@xxxxxxxxxxxxxx> Cc: Stefan Agner <stefan@xxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: andrew@xxxxxxx Cc: Vivien Didelot <vivien.didelot@xxxxxxxxxxxxxxxxxxxx> Cc: cphealy@xxxxxxxxx Tested-by: Nikita Yushchenko <nikita.yoush@xxxxxxxxxxxxxxxxxx> Signed-off-by: Andrey Smirnov <andrew.smirnov@xxxxxxxxx> --- No changes since v4 arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 9 --------- 1 file changed, 9 deletions(-) diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index fa19cfd..2210811 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -677,15 +677,6 @@ >; }; - pinctrl_pwm0: pwm0grp { - fsl,pins = < - VF610_PAD_PTB0__FTM0_CH0 0x1582 - VF610_PAD_PTB1__FTM0_CH1 0x1582 - VF610_PAD_PTB2__FTM0_CH2 0x1582 - VF610_PAD_PTB3__FTM0_CH3 0x1582 - >; - }; - pinctrl_qspi0: qspi0grp { fsl,pins = < VF610_PAD_PTD7__QSPI0_B_QSCK 0x31c3 -- 2.9.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html