Re: [PATCH v5 5/5] arm64: dts: exynos: Add tm2 touchkey node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Chanwoo,

> >>> +       touchkey@20 {
> >>> +               compatible = "samsung,tm2-touchkey";
> >>> +               reg = <0x20>;
> >>> +               interrupt-parent = <&gpa3>;
> >>> +               interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
> >>> +               vcc-supply = <&ldo32_reg>;
> >>> +               vdd-supply = <&ldo33_reg>;
> >>> +       };
> >>> +};
> >>> +
> >>>  &ldo31_reg {
> >>>         regulator-name = "TSP_VDD_1.85V_AP";
> >>>         regulator-min-microvolt = <1850000>;
> 
> I repiled the touchkey driver against compatible name.
> Usually, when developing the device driver, we use the specific h/w name
> but in this patch, the touckey dt node uses the h/w board name instead of
> original touckhey name.

this should be a device specifically done for the tm2 and we are
not sure who is the manufacturer of the device. In order to not
assign the device to the wrong manufacturer, we preferred calling
it Samsung as it is in a Samsung device.

Andi
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux