Correct the Marvell Orion MDIO binding document to properly reflect the
cases where an interrupt is present. Augment the examples to show this.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
---
.../devicetree/bindings/net/marvell-orion-mdio.txt | 17 +++++++++++++++--
1 file changed, 15 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
index 9417e54c26c0..ca733ff68ab9 100644
--- a/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
+++ b/Documentation/devicetree/bindings/net/marvell-orion-mdio.txt
@@ -7,7 +7,10 @@ interface.
Required properties:
- compatible: "marvell,orion-mdio"
-- reg: address and length of the SMI register
+- reg: address and length of the MDIO registers. When an interrupt is
+ not present, the length is the size of the SMI register (4 bytes)
+ otherwise it must be 0x84 bytes to cover the interrupt control
+ registers.
Optional properties:
- interrupts: interrupt line number for the SMI error/done interrupt
@@ -17,7 +20,7 @@ The child nodes of the MDIO driver are the individual PHY devices
connected to this MDIO bus. They must have a "reg" property given the
PHY address on the MDIO bus.
-Example at the SoC level:
+Example at the SoC level without an interrupt property:
mdio {
#address-cells = <1>;
@@ -26,6 +29,16 @@ mdio {
reg = <0xd0072004 0x4>;
};
+Example with an interrupt property:
+
+mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "marvell,orion-mdio";
+ reg = <0xd0072004 0x84>;
+ interrupts = <30>;
+};
+
And at the board level:
mdio {
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
