Currently tm2e dts includes tm2 but there are some differences between the two boards and tm2 has some properties that tm2e doesn't have. That's why it's important to keep the two dts files independent and put all the commonalities in a tm2-common.dtsi file. At the current status the only two differences between the two dts files (besides the board name) are ldo31 and ldo38. Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx> Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> --- ...ynos5433-tm2.dts => exynos5433-tm2-common.dtsi} | 21 +- arch/arm64/boot/dts/exynos/exynos5433-tm2.dts | 1150 +------------------- arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 2 +- 3 files changed, 42 insertions(+), 1131 deletions(-) copy arch/arm64/boot/dts/exynos/{exynos5433-tm2.dts => exynos5433-tm2-common.dtsi} (98%) rewrite arch/arm64/boot/dts/exynos/exynos5433-tm2.dts (98%) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi similarity index 98% copy from arch/arm64/boot/dts/exynos/exynos5433-tm2.dts copy to arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 640e4b9910ae..cc6701b3bce4 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -3,8 +3,8 @@ * * Copyright (c) 2016 Samsung Electronics Co., Ltd. * - * Device tree source file for Samsung's TM2 board which is based on - * Samsung Exynos5433 SoC. + * Common device tree source file for Samsung's TM2 and TM2E boards + * which are based on Samsung Exynos5433 SoC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -19,9 +19,6 @@ #include <dt-bindings/interrupt-controller/irq.h> / { - model = "Samsung TM2 board"; - compatible = "samsung,tm2", "samsung,exynos5433"; - aliases { gsc0 = &gsc_0; gsc1 = &gsc_1; @@ -552,9 +549,10 @@ }; ldo31_reg: LDO31 { - regulator-name = "TSP_VDD_1.85V_AP"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; + /* + * LDO31 differs from target to target, + * its definition is in the .dts + */ }; ldo32_reg: LDO32 { @@ -595,9 +593,10 @@ }; ldo38_reg: LDO38 { - regulator-name = "VCC_3.0V_MOTOR_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + /* + * LDO38 differs from target to target, + * its definition is in the .dts + */ }; ldo39_reg: LDO39 { diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts dissimilarity index 98% index 640e4b9910ae..2449266b268f 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -1,1119 +1,31 @@ -/* - * SAMSUNG Exynos5433 TM2 board device tree source - * - * Copyright (c) 2016 Samsung Electronics Co., Ltd. - * - * Device tree source file for Samsung's TM2 board which is based on - * Samsung Exynos5433 SoC. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/dts-v1/; -#include "exynos5433.dtsi" -#include <dt-bindings/clock/samsung,s2mps11.h> -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/interrupt-controller/irq.h> - -/ { - model = "Samsung TM2 board"; - compatible = "samsung,tm2", "samsung,exynos5433"; - - aliases { - gsc0 = &gsc_0; - gsc1 = &gsc_1; - gsc2 = &gsc_2; - pinctrl0 = &pinctrl_alive; - pinctrl1 = &pinctrl_aud; - pinctrl2 = &pinctrl_cpif; - pinctrl3 = &pinctrl_ese; - pinctrl4 = &pinctrl_finger; - pinctrl5 = &pinctrl_fsys; - pinctrl6 = &pinctrl_imem; - pinctrl7 = &pinctrl_nfc; - pinctrl8 = &pinctrl_peric; - pinctrl9 = &pinctrl_touch; - serial0 = &serial_0; - serial1 = &serial_1; - serial2 = &serial_2; - serial3 = &serial_3; - spi0 = &spi_0; - spi1 = &spi_1; - spi2 = &spi_2; - spi3 = &spi_3; - spi4 = &spi_4; - mshc0 = &mshc_0; - mshc2 = &mshc_2; - }; - - chosen { - stdout-path = &serial_1; - }; - - memory@20000000 { - device_type = "memory"; - reg = <0x0 0x20000000 0x0 0xc0000000>; - }; - - gpio-keys { - compatible = "gpio-keys"; - - power-key { - gpios = <&gpa2 7 GPIO_ACTIVE_LOW>; - linux,code = <KEY_POWER>; - label = "power key"; - debounce-interval = <10>; - }; - - volume-up-key { - gpios = <&gpa2 0 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEUP>; - label = "volume-up key"; - debounce-interval = <10>; - }; - - volume-down-key { - gpios = <&gpa2 1 GPIO_ACTIVE_LOW>; - linux,code = <KEY_VOLUMEDOWN>; - label = "volume-down key"; - debounce-interval = <10>; - }; - - homepage-key { - gpios = <&gpa0 3 GPIO_ACTIVE_LOW>; - linux,code = <KEY_MENU>; - label = "homepage key"; - debounce-interval = <10>; - }; - }; - - i2c_max98504: i2c-gpio-0 { - compatible = "i2c-gpio"; - gpios = <&gpd0 1 GPIO_ACTIVE_HIGH /* SPK_AMP_SDA */ - &gpd0 0 GPIO_ACTIVE_HIGH /* SPK_AMP_SCL */ >; - i2c-gpio,delay-us = <2>; - #address-cells = <1>; - #size-cells = <0>; - status = "okay"; - - max98504: max98504@31 { - compatible = "maxim,max98504"; - reg = <0x31>; - maxim,rx-path = <1>; - maxim,tx-path = <1>; - maxim,tx-channel-mask = <3>; - maxim,tx-channel-source = <2>; - }; - }; - - sound { - compatible = "samsung,tm2-audio"; - audio-codec = <&wm5110>; - i2s-controller = <&i2s0>; - audio-amplifier = <&max98504>; - mic-bias-gpios = <&gpr3 2 GPIO_ACTIVE_HIGH>; - model = "wm5110"; - samsung,audio-routing = - /* Headphone */ - "HP", "HPOUT1L", - "HP", "HPOUT1R", - - /* Speaker */ - "SPK", "SPKOUT", - "SPKOUT", "HPOUT2L", - "SPKOUT", "HPOUT2R", - - /* Receiver */ - "RCV", "HPOUT3L", - "RCV", "HPOUT3R"; - status = "okay"; - }; -}; - -&adc { - vdd-supply = <&ldo3_reg>; - status = "okay"; - - thermistor-ap { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 0>; - }; - - thermistor-battery { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 1>; - #thermal-sensor-cells = <0>; - }; - - thermistor-charger { - compatible = "murata,ncp03wf104"; - pullup-uv = <1800000>; - pullup-ohm = <100000>; - pulldown-ohm = <0>; - io-channels = <&adc 2>; - }; -}; - -&bus_g2d_400 { - devfreq-events = <&ppmu_event0_d0_general>, <&ppmu_event0_d1_general>; - vdd-supply = <&buck4_reg>; - exynos,saturation-ratio = <10>; - status = "okay"; -}; - -&bus_g2d_266 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_gscl { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_hevc { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_jpeg { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_mfc { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_mscl { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_noc0 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_noc1 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&bus_noc2 { - devfreq = <&bus_g2d_400>; - status = "okay"; -}; - -&cmu_aud { - assigned-clocks = <&cmu_aud CLK_MOUT_AUD_PLL_USER>; - assigned-clock-parents = <&cmu_top CLK_FOUT_AUD_PLL>; -}; - -&cmu_fsys { - assigned-clocks = <&cmu_top CLK_MOUT_SCLK_USBDRD30>, - <&cmu_top CLK_MOUT_SCLK_USBHOST30>, - <&cmu_fsys CLK_MOUT_SCLK_USBDRD30_USER>, - <&cmu_fsys CLK_MOUT_SCLK_USBHOST30_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_USER>, - <&cmu_fsys CLK_MOUT_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_USER>, - <&cmu_top CLK_DIV_SCLK_USBDRD30>, - <&cmu_top CLK_DIV_SCLK_USBHOST30>; - assigned-clock-parents = <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>, - <&cmu_top CLK_SCLK_USBDRD30_FSYS>, - <&cmu_top CLK_SCLK_USBHOST30_FSYS>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PIPE_PCLK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBDRD30_UDRD30_PHYCLOCK_PHY>, - <&cmu_fsys CLK_PHYCLK_USBHOST30_UHOST30_PHYCLOCK_PHY>; - assigned-clock-rates = <0>, <0>, <0>, <0>, <0>, <0>, <0>, <0>, - <66700000>, <66700000>; -}; - -&cmu_gscl { - assigned-clocks = <&cmu_gscl CLK_MOUT_ACLK_GSCL_111_USER>, - <&cmu_gscl CLK_MOUT_ACLK_GSCL_333_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_GSCL_111>, - <&cmu_top CLK_ACLK_GSCL_333>; -}; - -&cmu_mfc { - assigned-clocks = <&cmu_mfc CLK_MOUT_ACLK_MFC_400_USER>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MFC_400>; -}; - -&cmu_mscl { - assigned-clocks = <&cmu_mscl CLK_MOUT_ACLK_MSCL_400_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG>, - <&cmu_top CLK_MOUT_SCLK_JPEG_A>; - assigned-clock-parents = <&cmu_top CLK_ACLK_MSCL_400>, - <&cmu_top CLK_SCLK_JPEG_MSCL>, - <&cmu_mscl CLK_MOUT_SCLK_JPEG_USER>, - <&cmu_top CLK_MOUT_BUS_PLL_USER>; -}; - -&cpu0 { - cpu-supply = <&buck3_reg>; -}; - -&cpu4 { - cpu-supply = <&buck2_reg>; -}; - -&decon { - status = "okay"; - - i80-if-timings { - }; -}; - -&dsi { - status = "okay"; - vddcore-supply = <&ldo6_reg>; - vddio-supply = <&ldo7_reg>; - samsung,pll-clock-frequency = <24000000>; - pinctrl-names = "default"; - pinctrl-0 = <&te_irq>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@1 { - reg = <1>; - - dsi_out: endpoint { - samsung,burst-clock-frequency = <512000000>; - samsung,esc-clock-frequency = <16000000>; - }; - }; - }; -}; - -&hsi2c_0 { - status = "okay"; - clock-frequency = <2500000>; - - s2mps13-pmic@66 { - compatible = "samsung,s2mps13-pmic"; - interrupt-parent = <&gpa0>; - interrupts = <7 IRQ_TYPE_NONE>; - reg = <0x66>; - samsung,s2mps11-wrstbi-ground; - - s2mps13_osc: clocks { - compatible = "samsung,s2mps13-clk"; - #clock-cells = <1>; - clock-output-names = "s2mps13_ap", "s2mps13_cp", - "s2mps13_bt"; - }; - - regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_0.9V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <900000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_MMC2_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDD1_E_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDD10_MIF_PLL_1.0V_AP"; - regulator-min-microvolt = <1300000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDD10_DPLL_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MIPI2L_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD18_MIPI2L_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo8_reg: LDO8 { - regulator-name = "VDD18_LLI_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo9_reg: LDO9 { - regulator-name = "VDD18_ABB_ETC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo10_reg: LDO10 { - regulator-name = "VDD33_USB30_3.0V_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD_INT_M_1.0V_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD_KFC_M_1.1V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDD_G3D_M_0.95V_AP"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <950000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDDQ_M1_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDDQ_M2_LDO_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDDQ_EFUSE"; - regulator-min-microvolt = <1400000>; - regulator-max-microvolt = <3400000>; - regulator-always-on; - }; - - ldo17_reg: LDO17 { - regulator-name = "V_TFLASH_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo18_reg: LDO18 { - regulator-name = "V_CODEC_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo19_reg: LDO19 { - regulator-name = "VDDA_1.8V_COMP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo20_reg: LDO20 { - regulator-name = "VCC_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "VT_CAM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo22_reg: LDO22 { - regulator-name = "CAM_IO_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo23_reg: LDO23 { - regulator-name = "CAM_SEN_CORE_1.05V_AP"; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - }; - - ldo24_reg: LDO24 { - regulator-name = "VT_CAM_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - }; - - ldo25_reg: LDO25 { - regulator-name = "UNUSED_LDO25"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo26_reg: LDO26 { - regulator-name = "CAM_AF_2.8V_AP"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo27_reg: LDO27 { - regulator-name = "VCC_3.0V_LCD_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo28_reg: LDO28 { - regulator-name = "VCC_1.8V_LCD_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo29_reg: LDO29 { - regulator-name = "VT_CAM_2.8V"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo30_reg: LDO30 { - regulator-name = "TSP_AVDD_3.3V_AP"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - ldo31_reg: LDO31 { - regulator-name = "TSP_VDD_1.85V_AP"; - regulator-min-microvolt = <1850000>; - regulator-max-microvolt = <1850000>; - }; - - ldo32_reg: LDO32 { - regulator-name = "VTOUCH_1.8V_AP"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo33_reg: LDO33 { - regulator-name = "VTOUCH_LED_3.3V"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-ramp-delay = <12500>; - }; - - ldo34_reg: LDO34 { - regulator-name = "VCC_1.8V_MHL_AP"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <2100000>; - }; - - ldo35_reg: LDO35 { - regulator-name = "OIS_VM_2.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <2800000>; - }; - - ldo36_reg: LDO36 { - regulator-name = "VSIL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - }; - - ldo37_reg: LDO37 { - regulator-name = "VF_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo38_reg: LDO38 { - regulator-name = "VCC_3.0V_MOTOR_AP"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - }; - - ldo39_reg: LDO39 { - regulator-name = "V_HRM_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - }; - - ldo40_reg: LDO40 { - regulator-name = "V_HRM_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_MIF_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck2_reg: BUCK2 { - regulator-name = "VDD_EGL_1.0V_AP"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck3_reg: BUCK3 { - regulator-name = "VDD_KFC_1.0V_AP"; - regulator-min-microvolt = <800000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck4_reg: BUCK4 { - regulator-name = "VDD_INT_0.95V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDD_DISP_CAM0_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck6_reg: BUCK6 { - regulator-name = "VDD_G3D_0.9V_AP"; - regulator-min-microvolt = <600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-state-mem { - regulator-off-in-suspend; - }; - }; - - buck7_reg: BUCK7 { - regulator-name = "VDD_MEM1_1.2V_AP"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "VDD_LLDO_1.35V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck9_reg: BUCK9 { - regulator-name = "VDD_MLDO_2.0V_AP"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - - buck10_reg: BUCK10 { - regulator-name = "vdd_mem2"; - regulator-min-microvolt = <550000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - }; - }; - }; -}; - -&hsi2c_8 { - status = "okay"; - - max77843@66 { - compatible = "maxim,max77843"; - interrupt-parent = <&gpa1>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reg = <0x66>; - - muic: max77843-muic { - compatible = "maxim,max77843-muic"; - }; - - regulators { - compatible = "maxim,max77843-regulator"; - safeout1_reg: SAFEOUT1 { - regulator-name = "SAFEOUT1"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - safeout2_reg: SAFEOUT2 { - regulator-name = "SAFEOUT2"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <4950000>; - }; - - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <100000>; - regulator-max-microamp = <3150000>; - }; - }; - - haptic: max77843-haptic { - compatible = "maxim,max77843-haptic"; - haptic-supply = <&ldo38_reg>; - pwms = <&pwm 0 33670 0>; - pwm-names = "haptic"; - }; - }; -}; - -&i2s0 { - status = "okay"; -}; - -&mshc_0 { - status = "okay"; - num-slots = <1>; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - cap-mmc-highspeed; - non-removable; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - samsung,dw-mshc-hs400-timing = <0 3>; - samsung,read-strobe-delay = <90>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_qrdy &sd0_bus1 &sd0_bus4 - &sd0_bus8 &sd0_rdqs>; - bus-width = <8>; - assigned-clocks = <&cmu_top CLK_SCLK_MMC0_FSYS>; - assigned-clock-rates = <800000000>; -}; - -&mshc_2 { - status = "okay"; - num-slots = <1>; - cap-sd-highspeed; - disable-wp; - cd-gpios = <&gpa2 4 GPIO_ACTIVE_HIGH>; - cd-inverted; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <0 4>; - samsung,dw-mshc-ddr-timing = <0 2>; - fifo-depth = <0x80>; - pinctrl-names = "default"; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; - bus-width = <4>; -}; - -&ppmu_d0_general { - status = "okay"; - events { - ppmu_event0_d0_general: ppmu-event0-d0-general { - event-name = "ppmu-event0-d0-general"; - }; - }; -}; - -&ppmu_d1_general { - status = "okay"; - events { - ppmu_event0_d1_general: ppmu-event0-d1-general { - event-name = "ppmu-event0-d1-general"; - }; - }; -}; - -&pinctrl_alive { - pinctrl-names = "default"; - pinctrl-0 = <&initial_alive>; - - initial_alive: initial-state { - PIN(INPUT, gpa0-0, DOWN, FAST_SR1); - PIN(INPUT, gpa0-1, NONE, FAST_SR1); - PIN(INPUT, gpa0-2, DOWN, FAST_SR1); - PIN(INPUT, gpa0-3, NONE, FAST_SR1); - PIN(INPUT, gpa0-4, NONE, FAST_SR1); - PIN(INPUT, gpa0-5, DOWN, FAST_SR1); - PIN(INPUT, gpa0-6, NONE, FAST_SR1); - PIN(INPUT, gpa0-7, NONE, FAST_SR1); - - PIN(INPUT, gpa1-0, UP, FAST_SR1); - PIN(INPUT, gpa1-1, NONE, FAST_SR1); - PIN(INPUT, gpa1-2, NONE, FAST_SR1); - PIN(INPUT, gpa1-3, DOWN, FAST_SR1); - PIN(INPUT, gpa1-4, DOWN, FAST_SR1); - PIN(INPUT, gpa1-5, NONE, FAST_SR1); - PIN(INPUT, gpa1-6, NONE, FAST_SR1); - PIN(INPUT, gpa1-7, NONE, FAST_SR1); - - PIN(INPUT, gpa2-0, NONE, FAST_SR1); - PIN(INPUT, gpa2-1, NONE, FAST_SR1); - PIN(INPUT, gpa2-2, NONE, FAST_SR1); - PIN(INPUT, gpa2-3, DOWN, FAST_SR1); - PIN(INPUT, gpa2-4, NONE, FAST_SR1); - PIN(INPUT, gpa2-5, DOWN, FAST_SR1); - PIN(INPUT, gpa2-6, DOWN, FAST_SR1); - PIN(INPUT, gpa2-7, NONE, FAST_SR1); - - PIN(INPUT, gpa3-0, DOWN, FAST_SR1); - PIN(INPUT, gpa3-1, DOWN, FAST_SR1); - PIN(INPUT, gpa3-2, NONE, FAST_SR1); - PIN(INPUT, gpa3-3, DOWN, FAST_SR1); - PIN(INPUT, gpa3-4, NONE, FAST_SR1); - PIN(INPUT, gpa3-5, DOWN, FAST_SR1); - PIN(INPUT, gpa3-6, DOWN, FAST_SR1); - PIN(INPUT, gpa3-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf1-0, NONE, FAST_SR1); - PIN(INPUT, gpf1-1, NONE, FAST_SR1); - PIN(INPUT, gpf1-2, DOWN, FAST_SR1); - PIN(INPUT, gpf1-4, UP, FAST_SR1); - PIN(OUTPUT, gpf1-5, NONE, FAST_SR1); - PIN(INPUT, gpf1-6, DOWN, FAST_SR1); - PIN(INPUT, gpf1-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf2-0, DOWN, FAST_SR1); - PIN(INPUT, gpf2-1, DOWN, FAST_SR1); - PIN(INPUT, gpf2-2, DOWN, FAST_SR1); - PIN(INPUT, gpf2-3, DOWN, FAST_SR1); - - PIN(INPUT, gpf3-0, DOWN, FAST_SR1); - PIN(INPUT, gpf3-1, DOWN, FAST_SR1); - PIN(INPUT, gpf3-2, NONE, FAST_SR1); - PIN(INPUT, gpf3-3, DOWN, FAST_SR1); - - PIN(INPUT, gpf4-0, DOWN, FAST_SR1); - PIN(INPUT, gpf4-1, DOWN, FAST_SR1); - PIN(INPUT, gpf4-2, DOWN, FAST_SR1); - PIN(INPUT, gpf4-3, DOWN, FAST_SR1); - PIN(INPUT, gpf4-4, DOWN, FAST_SR1); - PIN(INPUT, gpf4-5, DOWN, FAST_SR1); - PIN(INPUT, gpf4-6, DOWN, FAST_SR1); - PIN(INPUT, gpf4-7, DOWN, FAST_SR1); - - PIN(INPUT, gpf5-0, DOWN, FAST_SR1); - PIN(INPUT, gpf5-1, DOWN, FAST_SR1); - PIN(INPUT, gpf5-2, DOWN, FAST_SR1); - PIN(INPUT, gpf5-3, DOWN, FAST_SR1); - PIN(OUTPUT, gpf5-4, NONE, FAST_SR1); - PIN(INPUT, gpf5-5, DOWN, FAST_SR1); - PIN(INPUT, gpf5-6, DOWN, FAST_SR1); - PIN(INPUT, gpf5-7, DOWN, FAST_SR1); - }; - - te_irq: te_irq { - samsung,pins = "gpf1-3"; - samsung,pin-function = <0xf>; - }; -}; - -&pinctrl_cpif { - pinctrl-names = "default"; - pinctrl-0 = <&initial_cpif>; - - initial_cpif: initial-state { - PIN(INPUT, gpv6-0, DOWN, FAST_SR1); - PIN(INPUT, gpv6-1, DOWN, FAST_SR1); - }; -}; - -&pinctrl_ese { - pinctrl-names = "default"; - pinctrl-0 = <&initial_ese>; - - initial_ese: initial-state { - PIN(INPUT, gpj2-0, DOWN, FAST_SR1); - PIN(INPUT, gpj2-1, DOWN, FAST_SR1); - PIN(INPUT, gpj2-2, DOWN, FAST_SR1); - }; -}; - -&pinctrl_fsys { - pinctrl-names = "default"; - pinctrl-0 = <&initial_fsys>; - - initial_fsys: initial-state { - PIN(INPUT, gpr3-0, NONE, FAST_SR1); - PIN(INPUT, gpr3-1, DOWN, FAST_SR1); - PIN(INPUT, gpr3-2, DOWN, FAST_SR1); - PIN(INPUT, gpr3-3, DOWN, FAST_SR1); - PIN(INPUT, gpr3-7, NONE, FAST_SR1); - }; -}; - -&pinctrl_imem { - pinctrl-names = "default"; - pinctrl-0 = <&initial_imem>; - - initial_imem: initial-state { - PIN(INPUT, gpf0-0, UP, FAST_SR1); - PIN(INPUT, gpf0-1, UP, FAST_SR1); - PIN(INPUT, gpf0-2, DOWN, FAST_SR1); - PIN(INPUT, gpf0-3, UP, FAST_SR1); - PIN(INPUT, gpf0-4, DOWN, FAST_SR1); - PIN(INPUT, gpf0-5, NONE, FAST_SR1); - PIN(INPUT, gpf0-6, DOWN, FAST_SR1); - PIN(INPUT, gpf0-7, UP, FAST_SR1); - }; -}; - -&pinctrl_nfc { - pinctrl-names = "default"; - pinctrl-0 = <&initial_nfc>; - - initial_nfc: initial-state { - PIN(INPUT, gpj0-2, DOWN, FAST_SR1); - }; -}; - -&pinctrl_peric { - pinctrl-names = "default"; - pinctrl-0 = <&initial_peric>; - - initial_peric: initial-state { - PIN(INPUT, gpv7-0, DOWN, FAST_SR1); - PIN(INPUT, gpv7-1, DOWN, FAST_SR1); - PIN(INPUT, gpv7-2, NONE, FAST_SR1); - PIN(INPUT, gpv7-3, DOWN, FAST_SR1); - PIN(INPUT, gpv7-4, DOWN, FAST_SR1); - PIN(INPUT, gpv7-5, DOWN, FAST_SR1); - - PIN(INPUT, gpb0-4, DOWN, FAST_SR1); - - PIN(INPUT, gpc0-2, DOWN, FAST_SR1); - PIN(INPUT, gpc0-5, DOWN, FAST_SR1); - PIN(INPUT, gpc0-7, DOWN, FAST_SR1); - - PIN(INPUT, gpc1-1, DOWN, FAST_SR1); - - PIN(INPUT, gpc3-4, NONE, FAST_SR1); - PIN(INPUT, gpc3-5, NONE, FAST_SR1); - PIN(INPUT, gpc3-6, NONE, FAST_SR1); - PIN(INPUT, gpc3-7, NONE, FAST_SR1); - - PIN(OUTPUT, gpg0-0, NONE, FAST_SR1); - PIN(2, gpg0-1, DOWN, FAST_SR1); - - PIN(INPUT, gpd2-5, DOWN, FAST_SR1); - - PIN(INPUT, gpd4-0, NONE, FAST_SR1); - PIN(INPUT, gpd4-1, DOWN, FAST_SR1); - PIN(INPUT, gpd4-2, DOWN, FAST_SR1); - PIN(INPUT, gpd4-3, DOWN, FAST_SR1); - PIN(INPUT, gpd4-4, DOWN, FAST_SR1); - - PIN(INPUT, gpd6-3, DOWN, FAST_SR1); - - PIN(INPUT, gpd8-1, UP, FAST_SR1); - - PIN(INPUT, gpg1-0, DOWN, FAST_SR1); - PIN(INPUT, gpg1-1, DOWN, FAST_SR1); - PIN(INPUT, gpg1-2, DOWN, FAST_SR1); - PIN(INPUT, gpg1-3, DOWN, FAST_SR1); - PIN(INPUT, gpg1-4, DOWN, FAST_SR1); - - PIN(INPUT, gpg2-0, DOWN, FAST_SR1); - PIN(INPUT, gpg2-1, DOWN, FAST_SR1); - - PIN(INPUT, gpg3-0, DOWN, FAST_SR1); - PIN(INPUT, gpg3-1, DOWN, FAST_SR1); - PIN(INPUT, gpg3-5, DOWN, FAST_SR1); - PIN(INPUT, gpg3-7, DOWN, FAST_SR1); - }; -}; - -&pinctrl_touch { - pinctrl-names = "default"; - pinctrl-0 = <&initial_touch>; - - initial_touch: initial-state { - PIN(INPUT, gpj1-2, DOWN, FAST_SR1); - }; -}; - -&pwm { - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; - status = "okay"; -}; - -&mic { - status = "okay"; - - i80-if-timings { - }; -}; - -&pmu_system_controller { - assigned-clocks = <&pmu_system_controller 0>; - assigned-clock-parents = <&xxti>; -}; - -&serial_1 { - status = "okay"; -}; - -&spi_1 { - cs-gpios = <&gpd6 3 GPIO_ACTIVE_HIGH>; - status = "okay"; - - wm5110: wm5110-codec@0 { - compatible = "wlf,wm5110"; - reg = <0x0>; - spi-max-frequency = <20000000>; - interrupt-parent = <&gpa0>; - interrupts = <4 IRQ_TYPE_NONE>; - clocks = <&pmu_system_controller 0>, - <&s2mps13_osc S2MPS11_CLK_BT>; - clock-names = "mclk1", "mclk2"; - - gpio-controller; - #gpio-cells = <2>; - - wlf,micd-detect-debounce = <300>; - wlf,micd-bias-start-time = <0x1>; - wlf,micd-rate = <0x7>; - wlf,micd-dbtime = <0x1>; - wlf,micd-force-micbias; - wlf,micd-configs = <0x0 1 0>; - wlf,hpdet-channel = <1>; - wlf,gpsw = <0x1>; - wlf,inmode = <2 0 2 0>; - - wlf,reset = <&gpc0 7 GPIO_ACTIVE_HIGH>; - wlf,ldoena = <&gpf0 0 GPIO_ACTIVE_HIGH>; - - /* core supplies */ - AVDD-supply = <&ldo18_reg>; - DBVDD1-supply = <&ldo18_reg>; - CPVDD-supply = <&ldo18_reg>; - DBVDD2-supply = <&ldo18_reg>; - DBVDD3-supply = <&ldo18_reg>; - - controller-data { - samsung,spi-feedback-delay = <0>; - }; - }; -}; - -&timer { - clock-frequency = <24000000>; -}; - -&tmu_atlas0 { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_apollo { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&tmu_g3d { - vtmu-supply = <&ldo3_reg>; - status = "okay"; -}; - -&usbdrd30 { - vdd33-supply = <&ldo10_reg>; - vdd10-supply = <&ldo6_reg>; - status = "okay"; -}; - -&usbdrd_dwc3_0 { - dr_mode = "otg"; -}; - -&usbdrd30_phy { - vbus-supply = <&safeout1_reg>; - status = "okay"; -}; - -&xxti { - clock-frequency = <24000000>; -}; +/* + * SAMSUNG Exynos5433 TM2 board device tree source + * + * Copyright (c) 2016 Samsung Electronics Co., Ltd. + * + * Device tree source file for Samsung's TM2 board which is based on + * Samsung Exynos5433 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include "exynos5433-tm2-common.dtsi" + +/ { + model = "Samsung TM2 board"; + compatible = "samsung,tm2", "samsung,exynos5433"; +}; + +&ldo31_reg { + regulator-name = "TSP_VDD_1.85V_AP"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; +}; + +&ldo38_reg { + regulator-name = "VCC_3.0V_MOTOR_AP"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 854c583092d5..2fbf3a860316 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -11,7 +11,7 @@ * published by the Free Software Foundation. */ -#include "exynos5433-tm2.dts" +#include "exynos5433-tm2-common.dtsi" / { model = "Samsung TM2E board"; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html