From: Jaechul Lee <jcsing.lee@xxxxxxxxxxx> This patch adds the binding description of the tm2 touchkey device driver. Signed-off-by: Jaechul Lee <jcsing.lee@xxxxxxxxxxx> Reviewed-by: Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx> Reviewed-by: Andi Shyti <andi.shyti@xxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> Acked-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx> --- .../bindings/input/samsung,tm2-touchkey.txt | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/samsung,tm2-touchkey.txt diff --git a/Documentation/devicetree/bindings/input/samsung,tm2-touchkey.txt b/Documentation/devicetree/bindings/input/samsung,tm2-touchkey.txt new file mode 100644 index 000000000000..4de1af0f0a37 --- /dev/null +++ b/Documentation/devicetree/bindings/input/samsung,tm2-touchkey.txt @@ -0,0 +1,27 @@ +Samsung tm2-touchkey + +Required properties: +- compatible: must be "samsung,tm2-touchkey" +- reg: I2C address of the chip. +- interrupt-parent: a phandle for the interrupt controller (see interrupt + binding[0]). +- interrupts: interrupt to which the chip is connected (see interrupt + binding[0]). +- vcc-supply : internal regulator output. 1.8V +- vdd-supply : power supply for IC 3.3V + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Example: + &i2c0 { + /* ... */ + + touchkey@20 { + compatible = "samsung,tm2-touchkey"; + reg = <0x20>; + interrupt-parent = <&gpa3>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vcc-supply=<&ldo32_reg>; + vdd-supply=<&ldo33_reg>; + }; + }; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html