Add bindings documentation for the ADC128D818 driver, featuring default I2C
properties along with the optional 'mode' property for chip operation mode
selection (see datasheet, sec. 8.4.1).
Signed-off-by: Alexander Koch <mail@xxxxxxxxxxxxxxxxx>
Acked-by: Michael Hornung <mhornung.linux@xxxxxxxxx>
---
.../devicetree/bindings/hwmon/adc128d818.txt | 39 ++++++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/hwmon/adc128d818.txt
diff --git a/Documentation/devicetree/bindings/hwmon/adc128d818.txt b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
new file mode 100644
index 000000000000..db213dcc1391
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/adc128d818.txt
@@ -0,0 +1,39 @@
+TI ADC128D818 ADC System Monitor With Temperature Sensor
+--------------------------------------------------------
+
+Operation modes:
+
+ - Mode 0: 7 single-ended voltage readings (IN0-IN6),
+ 1 temperature reading (internal)
+ - Mode 1: 8 single-ended voltage readings (IN0-IN7),
+ no temperature
+ - Mode 2: 4 pseudo-differential voltage readings
+ (IN0-IN1, IN3-IN2, IN4-IN5, IN7-IN6),
+ 1 temperature reading (internal)
+ - Mode 3: 4 single-ended voltage readings (IN0-IN3),
+ 2 pseudo-differential voltage readings
+ (IN4-IN5, IN7-IN6),
+ 1 temperature reading (internal)
+
+If no operation mode is configured via device tree, the driver keeps the
+currently active chip operation mode (default is mode 0).
+
+
+Required node properties:
+
+ - compatible: must be set to "ti,adc128d818"
+ - reg: I2C address of the device
+
+Optional node properties:
+
+ - ti,mode: Operation mode (see above).
+
+
+Example (operation mode 2):
+
+ adc128d818@1d {
+ compatible = "ti,adc128d818";
+ reg = <0x1d>;
+ ti,mode = <2>;
+ };
+
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
