When using 8250_omap driver, we need to specify the right compatible value for the UART to work on dm814x and dm816x. Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> --- arch/arm/boot/dts/dm814x.dtsi | 6 +++--- arch/arm/boot/dts/dm816x.dtsi | 6 +++--- 2 files changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi --- a/arch/arm/boot/dts/dm814x.dtsi +++ b/arch/arm/boot/dts/dm814x.dtsi @@ -252,7 +252,7 @@ }; uart1: uart@20000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x20000 0x2000>; clock-frequency = <48000000>; @@ -262,7 +262,7 @@ }; uart2: uart@22000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x22000 0x2000>; clock-frequency = <48000000>; @@ -272,7 +272,7 @@ }; uart3: uart@24000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x24000 0x2000>; clock-frequency = <48000000>; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -373,7 +373,7 @@ }; uart1: uart@48020000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart1"; reg = <0x48020000 0x2000>; clock-frequency = <48000000>; @@ -383,7 +383,7 @@ }; uart2: uart@48022000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart2"; reg = <0x48022000 0x2000>; clock-frequency = <48000000>; @@ -393,7 +393,7 @@ }; uart3: uart@48024000 { - compatible = "ti,omap3-uart"; + compatible = "ti,am3352-uart", "ti,omap3-uart"; ti,hwmods = "uart3"; reg = <0x48024000 0x2000>; clock-frequency = <48000000>; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html