Hi Florian, On lun., janv. 02 2017, Florian Fainelli <f.fainelli@xxxxxxxxx> wrote: > Utilize the new DSA binding, introduced with commit 8c5ad1d6179d ("net: > dsa: Document new binding"). The legacy binding node is kept included, but is > marked disabled. > I tested this patch on mvebu/dt (I needed to reduce the context to apply the patch due to the changes made by Russell King on this file). I also set the status of the old binding to "disable" (instead of "okay"). It seems to work with the limited test did: ifconfig eth1 up udhcpc -i lan1 iperf -c mylaptop (same for lan4) However is there a way to be sure that the new binding is used? Gregory > Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx> > --- > arch/arm/boot/dts/armada-388-clearfog.dts | 65 +++++++++++++++++++++++++++++++ > 1 file changed, 65 insertions(+) > > diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts > index 71ce201c903e..35207aa1f4ec 100644 > --- a/arch/arm/boot/dts/armada-388-clearfog.dts > +++ b/arch/arm/boot/dts/armada-388-clearfog.dts > @@ -351,6 +351,8 @@ > }; > > dsa@0 { > + status = "okay"; > + > compatible = "marvell,dsa"; > dsa,ethernet = <ð1>; > dsa,mii-bus = <&mdio>; > @@ -444,3 +446,66 @@ > status = "disabled"; > }; > }; > + > +&mdio { > + status = "okay"; > + > + switch@4 { > + compatible = "marvell,mv88e6085"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <4>; > + pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>; > + pinctrl-names = "default"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + label = "lan5"; > + }; > + > + port@1 { > + reg = <1>; > + label = "lan4"; > + }; > + > + port@2 { > + reg = <2>; > + label = "lan3"; > + }; > + > + port@3 { > + reg = <3>; > + label = "lan2"; > + }; > + > + port@4 { > + reg = <4>; > + label = "lan1"; > + }; > + > + port@5 { > + reg = <5>; > + label = "cpu"; > + ethernet = <ð1>; > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + > + port@6 { > + /* 88E1512 external phy */ > + reg = <6>; > + label = "lan6"; > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + }; > + }; > + }; > +}; > -- > 2.9.3 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html