Re: [PATCH 1/3] dt-bindings: gpio: Add binding documentation for gpio-thunderx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, Jan 03, 2017 at 04:55:32PM -0800, David Daney wrote:
> From: David Daney <david.daney@xxxxxxxxxx>
> 
> Signed-off-by: David Daney <david.daney@xxxxxxxxxx>
> ---
>  .../devicetree/bindings/gpio/gpio-thunderx.txt     | 33 ++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/gpio/gpio-thunderx.txt
> 
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-thunderx.txt b/Documentation/devicetree/bindings/gpio/gpio-thunderx.txt
> new file mode 100644
> index 0000000..ba3cdae
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-thunderx.txt
> @@ -0,0 +1,33 @@
> +Cavium ThunderX/OCTEON-TX GPIO controller bindings
> +
> +Required Properties:
> +- reg: The controller bus address.
> +- gpio-controller: Marks the device node as a GPIO controller.
> +- #gpio-cells: Must be 2.
> +  - First cell is the GPIO pin number relative to the controller.
> +  - Second cell is standard of_gpio_flags:
> +     1 - Active Low.
> +     2 - Single Ended.

Just reference where these are defined.

> +
> +Optional Properties:
> +- compatible: "cavium,thunder-8890-gpio", unused as PCI driver binding is used.
> +- interrupt-controller: Marks the device node as an interrupt controller.
> +- #interrupt-cells: Must be present and have value of 2 if
> +                    "interrupt-controller" is present.
> +  - First cell is the GPIO pin number relative to the controller.
> +  - Second cell is triggering flags, one of:
> +    1 - Edge Rising
> +    2 - Edge Falling
> +    4 - Level High
> +    8 - Level Low

Just reference interrupt-controller/interrupts.txt or the header 
defining these.

> +
> +Example:
> +
> +gpio_6_0: gpio0@6,0 {

gpio@6,0

> +	compatible = "cavium,thunder-8890-gpio";
> +	reg = <0x3000 0 0 0 0>; /*  DEVFN = 0x30 (6:0) */
> +	gpio-controller;
> +	#gpio-cells = <2>;
> +	interrupt-controller;
> +	#interrupt-cells = <2>;
> +};
> -- 
> 1.8.3.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux