On Thu, Dec 12, 2013 at 02:27:58PM +0100, Lothar Waßmann wrote: > This will be used by the TX6 modules from Ka-Ro electronics. > > Signed-off-by: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/imx6qdl-pingrp.h | 11 +++++++++++ > 1 files changed, 11 insertions(+), 0 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6qdl-pingrp.h b/arch/arm/boot/dts/imx6qdl-pingrp.h > index 8d71b13..4932249 100644 > --- a/arch/arm/boot/dts/imx6qdl-pingrp.h > +++ b/arch/arm/boot/dts/imx6qdl-pingrp.h > @@ -100,6 +100,17 @@ > MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 \ > MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 > > +#define MX6QDL_ENET_PINGRP4 \ The '\' should just be after MX6QDL_ENET_PINGRP4 with a space in between. I just fixed it up and applied the first 3 patches. Shawn > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 \ > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 \ > + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 \ > + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 \ > + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 \ > + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 \ > + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 \ > + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 \ > + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 > + > #define MX6QDL_ESAI_PINGRP1 \ > MX6QDL_PAD_ENET_RXD0__ESAI_TX_HF_CLK 0x1b030 \ > MX6QDL_PAD_ENET_CRS_DV__ESAI_TX_CLK 0x1b030 \ > -- > 1.7.2.5 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
