On Mon, 02 Jan 2017, Quentin Schulz wrote:
> The CHR_CTRL1 register is made of 7 read-write bits with one being used
> to set the target voltage for battery charging.
>
> This adds the CHRG_CTRL1 register to the list of writeable registers for
> AXP20X and AXP22X PMICs.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
> ---
> drivers/mfd/axp20x.c | 2 ++
> 1 file changed, 2 insertions(+)
For my own reference:
Acked-for-MFD-by: Lee Jones <lee.jones@xxxxxxxxxx>
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 65c57d0..19bdba3 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -66,6 +66,7 @@ static const struct regmap_access_table axp152_volatile_table = {
> static const struct regmap_range axp20x_writeable_ranges[] = {
> regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
> regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT),
> + regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL1),
> regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
> regmap_reg_range(AXP20X_RDC_H, AXP20X_OCV(AXP20X_OCV_MAX)),
> };
> @@ -94,6 +95,7 @@ static const struct regmap_access_table axp20x_volatile_table = {
> static const struct regmap_range axp22x_writeable_ranges[] = {
> regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
> regmap_reg_range(AXP20X_VBUS_IPSOUT_MGMT, AXP20X_VBUS_IPSOUT_MGMT),
> + regmap_reg_range(AXP20X_CHRG_CTRL1, AXP20X_CHRG_CTRL1),
> regmap_reg_range(AXP20X_DCDC_MODE, AXP22X_BATLOW_THRES1),
> };
>
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
