Hi Rob,
Thank you for the review.
On 03 January, 2017 23:51 CET, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Sun, Jan 01, 2017 at 09:24:29PM +0100, Peter Senna Tschudin wrote:
> > Devicetree bindings documentation for the GE B850v3 LVDS/DP++
> > display bridge.
> >
> > Cc: Martyn Welch <martyn.welch@xxxxxxxxxxxxxxx>
> > Cc: Martin Donnelly <martin.donnelly@xxxxxx>
> > Cc: Javier Martinez Canillas <javier@xxxxxxxxxxxx>
> > Cc: Enric Balletbo i Serra <enric.balletbo@xxxxxxxxxxxxx>
> > Cc: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
> > Cc: Rob Herring <robh@xxxxxxxxxx>
> > Cc: Fabio Estevam <fabio.estevam@xxxxxxx>
> > Signed-off-by: Peter Senna Tschudin <peter.senna@xxxxxxxxxxxxx>
> > ---
> > There was an Acked-by from Rob Herring <robh@xxxxxxxxxx> for V6, but I changed
> > the bindings to use i2c_new_secondary_device() so I removed it from the commit
> > message.
> >
> > .../devicetree/bindings/ge/b850v3-lvds-dp.txt | 39 ++++++++++++++++++++++
>
> Generally, bindings are not organized by vendor. Put in
> bindings/display/bridge/... instead.
Will change that.
>
> > 1 file changed, 39 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
> >
> > diff --git a/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
> > new file mode 100644
> > index 0000000..1bc6ebf
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/ge/b850v3-lvds-dp.txt
> > @@ -0,0 +1,39 @@
> > +Driver for GE B850v3 LVDS/DP++ display bridge
> > +
> > +Required properties:
> > + - compatible : should be "ge,b850v3-lvds-dp".
>
> Isn't '-lvds-dp' redundant? The part# should be enough.
b850v3 is the name of the product, this is why the proposed name. What about, b850v3-dp2 dp2 indicating the second DP output?
>
> > + - reg : should contain the main address which is used to ack the
> > + interrupts and address for edid.
> > + - reg-names : comma separeted list of register names. Valid values
>
> s/separeted/separated/
argh, sorry for this. Will fix it.
>
> > + are "main", and "edid".
> > + - interrupt-parent : phandle of the interrupt controller that services
> > + interrupts to the device
> > + - interrupts : one interrupt should be described here, as in
> > + <0 IRQ_TYPE_LEVEL_HIGH>.
> > + - port : should describe the video signal connection between the host
> > + and the bridge.
> > +
> > +Example:
> > +
> > +&mux2_i2c2 {
> > + status = "okay";
> > + clock-frequency = <100000>;
> > +
> > + b850v3-lvds-dp-bridge@73 {
> > + compatible = "ge,b850v3-lvds-dp";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + reg = <0x73 0x72>;
> > + reg-names = "main", "edid";
> > +
> > + interrupt-parent = <&gpio2>;
> > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > + port {
> > + b850v3_dp_bridge_in: endpoint {
> > + remote-endpoint = <&lvds0_out>;
> > + };
> > + };
> > + };
> > +};
> > --
> > 2.5.5
> >
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
