Re: [PATCH 3/5] arm64: dts: sun50i: add MMC nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi,

On Tue, Jan 3, 2017 at 7:03 AM, Andre Przywara <andre.przywara@xxxxxxx> wrote:

A commit message explaining the mmc controllers would be nice.

> Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx>
> ---
>  arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 67 +++++++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> index e0dcab8..c680566 100644
> --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi
> @@ -150,6 +150,32 @@
>                                 pins = "PB8", "PB9";
>                                 function = "uart0";
>                         };
> +
> +                       mmc0_pins: mmc0@0 {
> +                               pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
> +                               function = "mmc0";
> +                               drive-strength = <30>;
> +                       };
> +
> +                       mmc0_default_cd_pin: mmc0_cd_pin@0 {
> +                               pins = "PF6";
> +                               function = "gpio_in";
> +                               bias-pull-up;
> +                       };

We are starting to drop pinmux nodes for gpio usage.

> +
> +                       mmc1_pins: mmc1@0 {
> +                               pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
> +                               function = "mmc1";
> +                               drive-strength = <30>;
> +                       };
> +
> +                       mmc2_pins: mmc2@0 {
> +                               pins = "PC1", "PC5", "PC6", "PC8", "PC9",
> +                                      "PC10", "PC11", "PC12", "PC13", "PC14",
> +                                      "PC15", "PC16";
> +                               function = "mmc2";
> +                               drive-strength = <30>;
> +                       };

Moreover I think you should split out the pinmux nodes to a separate patch.

>                 };
>
>                 uart0: serial@1c28000 {
> @@ -240,6 +266,47 @@
>                         #size-cells = <0>;
>                 };
>
> +               mmc0: mmc@1c0f000 {
> +                       compatible = "allwinner,sun50i-a64-mmc",
> +                                    "allwinner,sun5i-a13-mmc";

Given that sun5i doesn't support mmc delay timings, and the A64 has
calibration and delay timings, I wouldn't call them compatible.

Or are you claiming that for the A64 has a delay of 0 for the
currently supported speeds, so the calibration doesn't really
matter? If so this should be mentioned in the commit message.

> +                       reg = <0x01c0f000 0x1000>;
> +                       clocks = <&ccu 31>, <&ccu 75>;

The clock / reset index macros are in the tree now.
Please switch to them.

ChenYu

> +                       clock-names = "ahb", "mmc";
> +                       resets = <&ccu 8>;
> +                       reset-names = "ahb";
> +                       interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
> +                       status = "disabled";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +
> +               mmc1: mmc@1c10000 {
> +                       compatible = "allwinner,sun50i-a64-mmc",
> +                                    "allwinner,sun5i-a13-mmc";
> +                       reg = <0x01c10000 0x1000>;
> +                       clocks = <&ccu 32>, <&ccu 76>;
> +                       clock-names = "ahb", "mmc";
> +                       resets = <&ccu 9>;
> +                       reset-names = "ahb";
> +                       interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
> +                       status = "disabled";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +
> +               mmc2: mmc@1c11000 {
> +                       compatible = "allwinner,sun50i-a64-emmc";
> +                       reg = <0x01c11000 0x1000>;
> +                       clocks = <&ccu 33>, <&ccu 77>;
> +                       clock-names = "ahb", "mmc";
> +                       resets = <&ccu 10>;
> +                       reset-names = "ahb";
> +                       interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
> +                       status = "disabled";
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +               };
> +
>                 gic: interrupt-controller@1c81000 {
>                         compatible = "arm,gic-400";
>                         reg = <0x01c81000 0x1000>,
> --
> 2.8.2
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux