Move the uart nodes over to use the label form to reference the serial
devices, rather than replicating the device node path.
Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/armada-388-clearfog.dtsi | 14 +++++++-------
arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 12 ++++++------
2 files changed, 13 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
index 6149699eefc2..0f5938bede53 100644
--- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
@@ -93,13 +93,6 @@
wp-inverted;
};
- serial@12100 {
- /* mikrobus uart */
- pinctrl-0 = <&mikro_uart_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
-
usb@58000 {
/* CON3, nearest power. */
status = "okay";
@@ -305,3 +298,10 @@
pinctrl-names = "default";
status = "okay";
};
+
+&uart1 {
+ /* mikrobus uart */
+ pinctrl-0 = <&mikro_uart_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
index 681962a6395b..458884ff4c8c 100644
--- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
@@ -69,12 +69,6 @@
*/
status = "okay";
};
-
- serial@12000 {
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
- status = "okay";
- };
};
};
};
@@ -144,3 +138,9 @@
status = "disabled";
};
};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
