The optional SPI flash is fitted to the microsom, not the clearfog board, so it should be specified in the microsom DTS include file. Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx> --- arch/arm/boot/dts/armada-388-clearfog.dts | 14 ++------------ arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 14 ++++++++++++++ 2 files changed, 16 insertions(+), 12 deletions(-) diff --git a/arch/arm/boot/dts/armada-388-clearfog.dts b/arch/arm/boot/dts/armada-388-clearfog.dts index 3e7c3a6237c3..3980d05f5ece 100644 --- a/arch/arm/boot/dts/armada-388-clearfog.dts +++ b/arch/arm/boot/dts/armada-388-clearfog.dts @@ -423,9 +423,8 @@ &spi1 { /* - * We don't seem to have the W25Q32 on the - * A1 Rev 2.0 boards, so disable SPI. - * CS0: W25Q32 (doesn't appear to be present) + * Add SPI CS pins for clearfog: + * CS0: W25Q32 (not populated on uSOM) * CS1: * CS2: mikrobus */ @@ -434,13 +433,4 @@ &mikro_spi_pins>; pinctrl-names = "default"; status = "okay"; - - spi-flash@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "w25q32", "jedec,spi-nor"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <3000000>; - status = "disabled"; - }; }; diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi index 8c9842237b60..8a84fe3e9c28 100644 --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi @@ -126,3 +126,17 @@ }; }; + +&spi1 { + /* The microsom has an optional W25Q32 on board, connected to CS0 */ + pinctrl-0 = <&spi1_pins>; + + w25q32: spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25q32", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <3000000>; + status = "disabled"; + }; +}; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html