Re: [PATCH] DTS: MCCMON6: IMX: Provide support for iMX6Q based Liebherr mccmon6 board

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hello Lukasz,

On 12/27/2016 01:19 AM, Lukasz Majewski wrote:
> Signed-off-by: Lukasz Majewski <l.majewski@xxxxxxxxx>

please add a commit message with a short description of the change.

Also change subject line to "ARM: dts: imx6q: Add mccmon6 board support".

> ---
> MCCMON6 board support depends on following patches:
> 
> 1. "video: backlight: pwm_bl: Initialize fb_bl_on[x] and use_count during pwm_backlight_probe()"
> 	http://patchwork.ozlabs.org/patch/708844/
> 
> 2. "pwm: imx: Provide atomic operation for IMX PWM driver"
> 	http://patchwork.ozlabs.org/patch/708847/ - http://patchwork.ozlabs.org/patch/708843/
> 
> 
> ---
>  arch/arm/boot/dts/Makefile          |   1 +
>  arch/arm/boot/dts/imx6q-mccmon6.dts | 469 ++++++++++++++++++++++++++++++++++++
>  2 files changed, 470 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6q-mccmon6.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index c558ba7..7ce1080 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -382,6 +382,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6q-h100.dtb \
>  	imx6q-hummingboard.dtb \
>  	imx6q-icore-rqs.dtb \
> +	imx6q-mccmon6.dtb \
>  	imx6q-marsboard.dtb \

Please add a new line preserving alphabetical order.

>  	imx6q-nitrogen6x.dtb \
>  	imx6q-nitrogen6_max.dtb \
> diff --git a/arch/arm/boot/dts/imx6q-mccmon6.dts b/arch/arm/boot/dts/imx6q-mccmon6.dts
> new file mode 100644
> index 0000000..7445d01
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6q-mccmon6.dts
> @@ -0,0 +1,469 @@
> +/*
> + * Copyright 2016

Copyright holder is missing.

> + *
> + * Author: Lukasz Majewski <l.majewski@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */

Please add an empty line here to improve readability.

> +/dts-v1/;

Please add an empty line here to improve readability.

> +#include "imx6q.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pwm/pwm.h>
> +
> +/ {
> +	model = "Monitor6 i.MX6 Quad Board";

Missing hardware vendor name.

> +	compatible = "mccmon6", "fsl,imx6q";

Missing hardware vendor prefix before "mccmon6".

> +
> +	memory {
> +		reg = <0x10000000 0x80000000>;
> +	};
> +
> +	ethernet0 {
> +		status = "okay";
> +	};

It looks like a useless device node, you have a description of &fec already.

> +
> +	backlight_lvds: backlight {
> +		compatible = "pwm-backlight";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_display>;

I would recommend to rename "pinctrl_display" to "pinctrl_backlight".

> +		pwms = <&pwm2 0 5000000 PWM_POLARITY_INVERTED>;

This should work when extension to the i.MX PWM driver is merged.

> +		brightness-levels = <  0   1   2   3   4   5   6   7   8   9
> +				      10  11  12  13  14  15  16  17  18  19
> +				      20  21  22  23  24  25  26  27  28  29
> +				      30  31  32  33  34  35  36  37  38  39
> +				      40  41  42  43  44  45  46  47  48  49
> +				      50  51  52  53  54  55  56  57  58  59
> +				      60  61  62  63  64  65  66  67  68  69
> +				      70  71  72  73  74  75  76  77  78  79
> +				      80  81  82  83  84  85  86  87  88  89
> +				      90  91  92  93  94  95  96  97  98  99
> +				     100 101 102 103 104 105 106 107 108 109
> +				     110 111 112 113 114 115 116 117 118 119
> +				     120 121 122 123 124 125 126 127 128 129
> +				     130 131 132 133 134 135 136 137 138 139
> +				     140 141 142 143 144 145 146 147 148 149
> +				     150 151 152 153 154 155 156 157 158 159
> +				     160 161 162 163 164 165 166 167 168 169
> +				     170 171 172 173 174 175 176 177 178 179
> +				     180 181 182 183 184 185 186 187 188 189
> +				     190 191 192 193 194 195 196 197 198 199
> +				     200 201 202 203 204 205 206 207 208 209
> +				     210 211 212 213 214 215 216 217 218 219
> +				     220 221 222 223 224 225 226 227 228 229
> +				     230 231 232 233 234 235 236 237 238 239
> +				     240 241 242 243 244 245 246 247 248 249
> +				     250 251 252 253 254 255>;

I'm not sure that actually need such a long list of brightness levels.

> +		default-brightness-level = <50>;
> +		enable-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
> +	};
> +
> +	reg_lvds: regulator-lvds {
> +		compatible = "regulator-fixed";
> +		regulator-name = "lvds_ppen";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		regulator-boot-on;
> +		gpio = <&gpio1 19 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	panel-lvds0 {
> +		compatible = "innolux,g121x1-l03";
> +		backlight = <&backlight_lvds>;
> +		power-supply = <&reg_lvds>;
> +
> +		port {
> +			panel_in_lvds0: endpoint {
> +				remote-endpoint = <&lvds0_out>;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c1>;
> +	status = "okay";
> +};
> +
> +&i2c2 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c2>;
> +	status = "okay";
> +
> +	pmic: pfuze100@08 {
> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;
> +
> +		regulators {
> +			sw1a_reg: sw1ab {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw1c_reg: sw1c {
> +				regulator-min-microvolt = <300000>;
> +				regulator-max-microvolt = <1875000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +				regulator-ramp-delay = <6250>;
> +			};
> +
> +			sw2_reg: sw2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3950000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3a_reg: sw3a {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw3b_reg: sw3b {
> +				regulator-min-microvolt = <400000>;
> +				regulator-max-microvolt = <1975000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			sw4_reg: sw4 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			swbst_reg: swbst {
> +				regulator-min-microvolt = <5000000>;
> +				regulator-max-microvolt = <5150000>;
> +			};
> +
> +			snvs_reg: vsnvs {
> +				regulator-min-microvolt = <1000000>;
> +				regulator-max-microvolt = <3000000>;
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vref_reg: vrefddr {
> +				regulator-boot-on;
> +				regulator-always-on;
> +			};
> +
> +			vgen1_reg: vgen1 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen2_reg: vgen2 {
> +				regulator-min-microvolt = <800000>;
> +				regulator-max-microvolt = <1550000>;
> +			};
> +
> +			vgen3_reg: vgen3 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +			};
> +
> +			vgen4_reg: vgen4 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen5_reg: vgen5 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +
> +			vgen6_reg: vgen6 {
> +				regulator-min-microvolt = <1800000>;
> +				regulator-max-microvolt = <3300000>;
> +				regulator-always-on;
> +			};
> +		};
> +	};
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +
> +	imx6q-mccmon6 {
> +

Please drop the empty line above.

> +		pinctrl_enet: enetgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
> +				MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
> +				MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x1b0b0
> +				MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x1b0b0
> +				MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x1b0b0
> +				MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x1b0b0
> +				MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x1b0b0
> +				MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x1b0b0
> +				MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b0
> +				MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b0b0
> +				MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b0b0
> +				MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b0b0
> +				MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b0b0
> +				MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b0b0
> +				MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b0b0
> +				MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
> +				MX6QDL_PAD_GPIO_6__ENET_IRQ		0x000b1
> +			>;
> +		};
> +
> +		pinctrl_i2c1: i2c1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001b8b1
> +				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001b8b1
> +			>;
> +		};
> +
> +		pinctrl_i2c2: i2c2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
> +				MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
> +			>;
> +		};
> +
> +		pinctrl_uart1: uart1grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
> +				MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_usdhc2: usdhc2grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x17059
> +				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x10059
> +				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x17059
> +				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x17059
> +				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x17059
> +				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x17059
> +			>;
> +		};
> +
> +		pinctrl_usdhc3: usdhc3grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17059
> +				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10059
> +				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17059
> +				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17059
> +				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17059
> +				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17059
> +				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17059
> +				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17059
> +				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17059
> +				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17059
> +				MX6QDL_PAD_SD3_RST__SD3_RESET		0x17059
> +			>;
> +		};
> +
> +		pinctrl_weim_cs0: weimcs0grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_CS0__EIM_CS0_B		0xb0b1
> +			>;
> +		};
> +
> +		pinctrl_weim_nor: weimnorgrp {
> +			fsl,pins = <
> +				MX6QDL_PAD_EIM_OE__EIM_OE_B		0xb0b1
> +				MX6QDL_PAD_EIM_RW__EIM_RW		0xb0b1
> +				MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B	0xb060
> +				MX6QDL_PAD_EIM_D16__EIM_DATA16		0x1b0b0
> +				MX6QDL_PAD_EIM_D17__EIM_DATA17		0x1b0b0
> +				MX6QDL_PAD_EIM_D18__EIM_DATA18		0x1b0b0
> +				MX6QDL_PAD_EIM_D19__EIM_DATA19		0x1b0b0
> +				MX6QDL_PAD_EIM_D20__EIM_DATA20		0x1b0b0
> +				MX6QDL_PAD_EIM_D21__EIM_DATA21		0x1b0b0
> +				MX6QDL_PAD_EIM_D22__EIM_DATA22		0x1b0b0
> +				MX6QDL_PAD_EIM_D23__EIM_DATA23		0x1b0b0
> +				MX6QDL_PAD_EIM_D24__EIM_DATA24		0x1b0b0
> +				MX6QDL_PAD_EIM_D25__EIM_DATA25		0x1b0b0
> +				MX6QDL_PAD_EIM_D26__EIM_DATA26		0x1b0b0
> +				MX6QDL_PAD_EIM_D27__EIM_DATA27		0x1b0b0
> +				MX6QDL_PAD_EIM_D28__EIM_DATA28		0x1b0b0
> +				MX6QDL_PAD_EIM_D29__EIM_DATA29		0x1b0b0
> +				MX6QDL_PAD_EIM_D30__EIM_DATA30		0x1b0b0
> +				MX6QDL_PAD_EIM_D31__EIM_DATA31		0x1b0b0
> +				MX6QDL_PAD_EIM_A23__EIM_ADDR23		0xb0b1
> +				MX6QDL_PAD_EIM_A22__EIM_ADDR22		0xb0b1
> +				MX6QDL_PAD_EIM_A21__EIM_ADDR21		0xb0b1
> +				MX6QDL_PAD_EIM_A20__EIM_ADDR20		0xb0b1
> +				MX6QDL_PAD_EIM_A19__EIM_ADDR19		0xb0b1
> +				MX6QDL_PAD_EIM_A18__EIM_ADDR18		0xb0b1
> +				MX6QDL_PAD_EIM_A17__EIM_ADDR17		0xb0b1
> +				MX6QDL_PAD_EIM_A16__EIM_ADDR16		0xb0b1
> +				MX6QDL_PAD_EIM_DA15__EIM_AD15		0xb0b1
> +				MX6QDL_PAD_EIM_DA14__EIM_AD14		0xb0b1
> +				MX6QDL_PAD_EIM_DA13__EIM_AD13		0xb0b1
> +				MX6QDL_PAD_EIM_DA12__EIM_AD12		0xb0b1
> +				MX6QDL_PAD_EIM_DA11__EIM_AD11		0xb0b1
> +				MX6QDL_PAD_EIM_DA10__EIM_AD10		0xb0b1
> +				MX6QDL_PAD_EIM_DA9__EIM_AD09		0xb0b1
> +				MX6QDL_PAD_EIM_DA8__EIM_AD08		0xb0b1
> +				MX6QDL_PAD_EIM_DA7__EIM_AD07		0xb0b1
> +				MX6QDL_PAD_EIM_DA6__EIM_AD06		0xb0b1
> +				MX6QDL_PAD_EIM_DA5__EIM_AD05		0xb0b1
> +				MX6QDL_PAD_EIM_DA4__EIM_AD04		0xb0b1
> +				MX6QDL_PAD_EIM_DA3__EIM_AD03		0xb0b1
> +				MX6QDL_PAD_EIM_DA2__EIM_AD02		0xb0b1
> +				MX6QDL_PAD_EIM_DA1__EIM_AD01		0xb0b1
> +				MX6QDL_PAD_EIM_DA0__EIM_AD00		0xb0b1
> +			>;
> +		};
> +
> +		pinctrl_ecspi3: ecspi3grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
> +				MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
> +				MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
> +			>;
> +		};
> +
> +		pinctrl_ecspi3_cs: ecspi3cs {
> +			fsl,pins = <
> +				MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000
> +			>;
> +		};
> +		pinctrl_ecspi3_flwp: ecspi3flwp {
> +			fsl,pins = <
> +				MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x80000000
> +			>;
> +		};
> +
> +		pinctrl_uart4: uart4grp {
> +			fsl,pins = <
> +				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
> +				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
> +				MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B	0x1b0b1
> +				MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B	0x1b0b1
> +			>;
> +		};
> +
> +		pinctrl_display: dispgrp {
> +			fsl,pins = <
> +				/* BLEN_OUT */
> +				MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x1b0b0
> +				/* LVDS_PPEN_OUT */
> +				MX6QDL_PAD_SD1_DAT2__GPIO1_IO19   0x1b0b0

This GPIO should be moved to a pinctrl group of regulator-lvds device node.

> +			>;
> +		};
> +
> +		pinctrl_pwm2: pwm2grp {
> +			fsl,pins = <
> +				 MX6QDL_PAD_GPIO_1__PWM2_OUT	0x1b0b1
> +			>;
> +		};

Please sort out all pinctrl_* nodes alphabetically.

> +	};
> +};
> +
> +&fec {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_enet>;
> +	phy-mode = "rgmii";
> +	phy-reset-gpios = <&gpio1 27 0>;

GPIO1_27 has no pad configuration in pinctrl_enet.

> +	interrupts-extended = <&gpio1 6 IRQ_TYPE_LEVEL_HIGH>,
> +			      <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;

Should you add "uart-has-rtscts" property?

> +	status = "okay";
> +};
> +
> +&usdhc2 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc2>;
> +	cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;

bus-width = <4>;

You should consider to add the GPIO1_4 into pinctrl_usdhc2 group.

> +	status = "okay";
> +};
> +
> +&usdhc3 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_usdhc3>;
> +	bus-width = <8>;
> +	status = "okay";

No "cd-gpios" property, should you add "non-removable" property then?

> +};
> +
> +&weim {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_weim_nor &pinctrl_weim_cs0>;
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +	ranges = <0 0 0x08000000 0x08000000>;
> +	status = "okay";
> +
> +	nor@0,0 {
> +		compatible = "cfi-flash";
> +		reg = <0 0 0x02000000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		bank-width = <2>;
> +		use-advanced-sector-protection;
> +		fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
> +				0x0000c000 0x1404a38e 0x00000000>;
> +	};
> +};
> +
> +&ecspi3 {
> +	fsl,spi-num-chipselects = <1>;

This property is obsoleted, please remove it.

> +	cs-gpios = <&gpio4 24 0>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_ecspi3 &pinctrl_ecspi3_cs &pinctrl_ecspi3_flwp>;
> +	status = "okay";
> +
> +	flash: s25sl032p@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "spansion,s25sl032p", "jedec,spi-nor";
> +		spi-max-frequency = <40000000>;
> +		reg = <0>;
> +	};
> +};
> +
> +&uart4 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart4>;
> +	status = "okay";

Should you add "uart-has-rtscts" property?

> +};
> +
> +&ldb {
> +	status = "okay";
> +
> +	lvds0: lvds-channel@0 {
> +		fsl,data-mapping = "spwg";
> +		fsl,data-width = <24>;
> +		status = "okay";
> +
> +		port@4 {
> +			reg = <4>;
> +
> +			lvds0_out: endpoint {
> +				remote-endpoint = <&panel_in_lvds0>;
> +			};
> +		};
> +	};
> +};
> +
> +&pwm2 {
> +	#pwm-cells = <3>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_pwm2>;
> +	status = "okay";
> +};
> 

Please sort out all device nodes but &iomuxc alphabetically:

* iomuxc
* ecspi3
* fec
* i2c1
* i2c2
* ldb
* pwm2
* uart1
* uart4
* usdhc2
* usdhc3
* weim

--
With best wishes,
Vladimir
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux