Re: [PATCH v7 5/5] ARM: dts: da850: specify the maximum pixel clock rate for tilcdc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tuesday 13 December 2016 03:39 PM, Bartosz Golaszewski wrote:
> At maximum CPU frequency of 300 MHz the maximum pixel clock frequency
> is 37.5 MHz[1]. We must filter out any mode for which the calculated
> pixel clock rate would exceed this value.
> 
> Specify the max-pixelclock property for the display node for
> da850-lcdk.
> 
> [1] http://processors.wiki.ti.com/index.php/OMAP-L1x/C674x/AM1x_LCD_Controller_(LCDC)_Throughput_and_Optimization_Techniques

This wiki page is not really a TI datasheet and can change without
notice. I changed this to refer to
http://www.ti.com/lit/ds/symlink/am1808.pdf (SPRS653E, revised March
2014), table 6-110.

Applied to v4.11/dt

Thanks,
Sekhar
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux